Description
“`html
The cRIO-9068 is a model under the CompactRIO Controllers category designed to serve as an RT Controller. It features a dual-core processor operating at a frequency of 667 MHz. This controller is equipped with 512 MB of DRAM and utilizes a Zynq-7020 reconfigurable FPGA for flexible and efficient processing capabilities.
It boasts an internal storage capacity of 1 GB and provides 8 slots for expansion. The cRIO-9068 is well-equipped with communication interfaces, including two RS-232 serial ports, one RS-485 serial port, and two Ethernet ports. Additionally, it supports USB host connectivity and features two power connectors to facilitate redundant power supply setup, ensuring reliable operation.
The primary power source is V1 input, while the secondary power source, V2 input, allows for automatic switch-over in the event of a power failure. The Ethernet network interface on this device is capable of 10/100/1,000 Mbps auto-negotiation, providing flexible connection speeds. Moreover, it incorporates reverse-voltage protection to safeguard against potential power supply issues.
For optimal performance, it is recommended to use the NI PS-15 (781093-01) or NI PS-10 (782698-01) power supplies. Additionally, the NI 9979 (196939-01) can be used for strain relief for the power connector, enhancing the durability and longevity of the power connection.
Regarding software, the cRIO-9068 requires NI-Industrial communications for EtherCAT, LabVIEW, LabWindows for its operation, ensuring users have access to a powerful and versatile platform for their development and deployment needs. The part numbers associated with this model are 782663-01 and 782663-02, allowing users to identify and procure the correct version of the device for their specific application requirements.
“`
| Specification | Details |
|---|---|
| Model | cRIO-9068 |
| Part Numbers | 782663-01, 782663-02 |
| Category | CompactRIO Controllers |
| Type | RT Controller |
| Processor | Dual-core |
| CPU Frequency | 667 MHz |
| DRAM | 512 MB |
| FPGA | Zynq-7020 reconfigurable |
| Internal Storage | 1 GB |
| Slots | 8 |
| Serial Ports | Two RS-232, One RS-485 |
| Ethernet Ports | Two |
| USB Host Port | Yes |
| Power Connectors | Two (for redundant power supply) |
| Primary Power Source | V1 input |
| Secondary Power Source | V2 input (automatic switch-over) |
| Ethernet Network Interface | 10/100/1,000 Mbps auto-negotiated |
| Reverse-Voltage Protection | Yes |
| Recommended Power Supplies | NI PS-15 (781093-01), NI PS-10 (782698-01) |
| Strain Relief for Power Connector | NI 9979 (196939-01) |
| Software Requirement | NI-Industrial communications for EtherCAT, LabVIEW, LabWindows
Question 1: What processor does the cRIO-9068 use? Question 2: How much DRAM does the cRIO-9068 have? Question 3: What is the internal storage of the cRIO-9068? Question 4: Does the cRIO-9068 support redundant power supply? Question 5: What software is required for the cRIO-9068? |
