186287A-01

Description

“`html

The product with the Part Number 186287A-01 is identified as model FP-TB-10, which falls under the FieldPoint category. This model is described as the FP-TB-10 Dual Channel Terminal Base for 6 Modules, specifically noted as not for new design. The Manufacturer Part Number associated with this model is 777519-10.

One of the key features of this product is its Channel Isolation, where each dual-channel I/O module is independently isolated. It is equipped with 36 Screw Terminals for connectivity. When it comes to analog inputs, it can handle 2 differential or 2 single-ended analog input modules with a 12-bit resolution. The voltage and current input impedances are rated at 2.2 MΩ and 133 Ω, respectively.

For analog output, the FP-TB-10 supports 2 single-ended output modules, with an output impedance and drive capacity of 10 Ω and 10 mA. This device also supports Hot Plug and Play, enhancing its usability in various applications. The Double Insulation Operating Voltage is capable of handling up to 250 Vrms, with Field Wiring Fault Voltage Protection up to 2500 Vrms.

The Power Requirements for the FP-TB-10 are detailed as 150 mW for the base, 375 mW for AI modules, 1100 mW for AO modules, 60 mW for DI modules, and 70 mW for DO modules. The Measurement Resolution of the device is 12 bits (1 part in 4096). It can be Clipped or mounted onto 35 mm DIN-rails or panels, offering flexibility in installation. The Weight of the device is 10.2 oz, and it operates within a temperature range of –40. Specification Detail Part Number 186287A-01 Model FP-TB-10 Category FieldPoint Description FP-TB-10 Dual Channel Terminal Base for 6 Modules (Not for New Design) Manufacturer Part Number 777519-10 Channel Isolation Each dual-channel I/O module is independently isolated Screw Terminals 36 Analog Input Modules 2 differential or 2 single-ended Resolution 12-bit Voltage and Current Input Impedances 2.2 MΩ and 133 Ω Analog Output Modules 2 single-ended Output Impedance and Drive 10 Ω and 10 mA Hot Plug and Play Supported Double Insulation Operating Voltage Up to 250 Vrms Field Wiring Fault Voltage Protection Up to 2500 Vrms Power Requirements 150 mW (base), 375 mW (AI), 1100 mW (AO), 60 mW (DI), 70 mW (DO) Measurement Resolution 12 bits (1 part in 4096) Mounting Clipped or mounted onto 35 mm DIN-rails or panels Weight 10.2 oz Operating Temperature Range –40

Question 1: What is the part number of the FP-TB-10?
Answer 1: 186287A-01

Question 2: What type of modules does FP-TB-10 support?
Answer 2: Dual-channel for 6 modules

Question 3: What is the power requirement for AI modules in FP-TB-10?
Answer 3: 375 mW

Question 4: Can FP-TB-10 operate in extreme temperatures?
Answer 4: -40°C to +70°C

Question 5: Does FP-TB-10 support hot plug and play?
Answer 5: Yes