AMETEK 3PCI

Description

AMETEK 3PCI Trigger Power Controller

The Robicon/AMETEK 3PCI (Part Number: R460C17.25) Trigger Power Controller delivers three-phase power to resistive and inductive loads. 3PCI stands for three-phase, cosine intercept. The 3PCI uses unlimited firing angle resolution for exact SCR control. This controller can function with many types of input signals and line voltages. Several features of this model include: 50/60 Hz functioning without necessary modifications, input isolation from ground, and a soft-start function.

is utilized for remotely setting off the recorder by means of a helper contact on an insurance transfer or engine starter. The advanced input must have a DC power supply within the range of 20 – 148V associated remotely. The extremity of the terminals must be watched. When the contact being observed is shut, a maximum of 10 mA will course through it. The 'outer trigger' must be empowered from the Display Station for outside activating to work. The information can be set for edge or level affectability. When all the important associations have been made, the framework is turned on by applying power and moving the supply flip switch, which can be found on the mounting plate inside at the base of the divider mounting unit, and inside the rackmounting unit at the front right. If the battery alternative is fitted, there will be a second switch.

The inspecting rate, channel marks, and scaling and different parameters, may have been set at the processing plant. If these parameters need to be changed, the Display Station must be associated with the 'Modified' plug on the mounting section.

Technical Specifications