Description
The National Instruments NI-6584 Digital I/O Adapter Module for FlexRIO is a versatile component belonging to the PXI Digital Instruments category, designed to cater to a wide range of applications such as custom measurement and control hardware, digital signal processing (DSP), high-speed control, and digital protocol interfacing. This module is uniquely identified by part numbers 781290-01, 781290-03, and 781290-02.
At the heart of its design, the NI-6584 features an RS-422/RS-485 interface type, ensuring robust communication capabilities. It is equipped with 16 RX and TX sets that facilitate efficient data transmission and reception, supporting a data rate of more than 16 Mbits/s. This performance is further enhanced by its ability to operate in either half or full duplex configurations, providing flexibility in communication strategies.
The module offers termination options of either 100 Ohm terminated or no termination, allowing for customization based on specific application requirements. Additionally, it boasts a maximum clock rate of 100 MHz, ensuring high-speed operations.
Designed for compatibility with FlexRIO FPGA Module and Controller for FlexRIO, the NI-6584 extends its utility to various applications requiring custom measurement and control hardware, digital signal processing, high-speed control, and digital protocol interfacing, making it a versatile choice for professionals in the field.
| Specification | Details |
|---|---|
| Part Numbers | 781290-01, 781290-03, 781290-02 |
| Category | PXI Digital Instruments |
| Model | NI-6584 |
| Description | National Instruments NI-6584 Digital I/O Adapter Module for FlexRIO |
| Interface Type | RS-422/RS-485 |
| Channels | 16 RX and TX sets |
| Data Rate | More than 16 Mbits/s |
| Duplex Configurations | Half or Full duplex |
| Termination Options | 100 Ohm terminated or no termination |
| Maximum Clock Rate | 100 MHz |
| Compatibility | FlexRIO FPGA Module, Controller for FlexRIO |
| Application | Custom measurement and control hardware, Digital signal processing (DSP), High-speed control, Digital protocol interfacing |
Question 1: What interface does the NI-6584 use?
Answer 1: RS-422/RS-485 interface.
Question 2: How many RX/TX sets does the NI-6584 have?
Answer 2: 16 RX/TX sets.
Question 3: What is the maximum clock rate of the NI-6584?
Answer 3: Up to 100 MHz.
Question 4: Can the NI-6584 operate in half/full duplex modes?
Answer 4: Yes, supports both half and full duplex.
Question 5: What termination options does the NI-6584 offer?
Answer 5: 100 Ohm terminated or no termination.
