Description
The NI-9262 DSUB High-Speed AO, part number 785503-01, falls under the C Series Analog Output category. This model is designed to provide high-speed analog output capabilities, making it an essential component for various applications requiring precise voltage control and rapid data update rates.
It features a 6-Channel Voltage Output system that allows for multiple signals to be controlled simultaneously. Each channel is capable of an impressive 1 MS/s/ch update capability, ensuring that data is transmitted efficiently and without delay.
The output range of the NI-9262 is ±10 V, with each channel able to drive currents up to ±10 mA. This flexibility in output parameters makes it suitable for a wide range of applications. In addition, it has a capacity to handle a capacitive drive of 1 nF, ensuring compatibility with a variety of external devices.
With an output impedance of 0.6 Ω, the device is designed to minimize power losses and maintain signal integrity. It also boasts a low noise level of 150 µV RMS (at 0.1 Hz to 1 MHz), which is crucial for applications requiring precision and accuracy.
The slew rate of 5 V/µs indicates the speed at which the output voltage can change, further underscoring the device’s capability for high-speed operation. Upon power on, the device defaults to a 0 V state, ensuring a safe start-up sequence. It also features overvoltage protection of up to ± 30 V maximum, safeguarding the device from unexpected power surges.
With a minimum update time of 1.5 µs, the NI-9262 is engineered for rapid response to control commands. The device also offers isolation (channel-to-earth ground) of 60 V DC, CAT I, providing an
| Specification | Detail |
|---|---|
| Part Number | 785503-01 |
| Category | C Series Analog Output |
| Model | NI-9262 |
| Description | NI 9262 DSUB High-Speed AO |
| Channels | 6-Channel Voltage Output |
| Update Capability | 1 MS/s/ch simultaneously |
| Output Range | ±10 V |
| Current Drive per Channel | ±10 mA |
| Capacitive Drive | 1 nF |
| Output Impedance | 0.6 Ω |
| Noise | 150 µV RMS (at 0.1 Hz to 1 MHz) |
| Slew Rate | 5 V/µs |
| Power On State | 0 V |
| Overvoltage Protection | ± 30 V maximum |
| Minimum Update Time | 1.5 µs |
| Isolation (Channel-to-earth ground) | 60 V DC, CAT I |
