Description
The product with Part Number 193594A-01 (779707-01) falls under the Automotive Networking Products category. Specifically, it is the NI-9852 model, which is designed for robust and efficient automotive networking. This model features Two 9-pin male D-Sub connectors, ensuring reliable physical connections for automotive communication networks.
For its operation, the NI-9852 requires a twisted pair cable, which is standard for minimizing interference in automotive environments. The module is equipped with two isolated common pins (COM), which are internally connected to the module’s isolated reference. Additionally, there is an optional shield pin (SHLD) that can be utilized for shielded CAN cable, enhancing the system’s resistance to electromagnetic interference (EMI).
One of the remarkable features of the NI-9852 is its ability to support a maximum number of nodes that exceeds 32 for Low-Speed/Fault-Tolerant CAN networks. This capability is dependent on the network’s electrical characteristics. Furthermore, the module boasts two independent slots, each equipped with a Philips SJA1000 CAN controller and a TJA1054A transceiver. This setup ensures high reliability and performance in automotive networking applications.
The NI-9852 is compatible with 11 and 29 bit CAN identifiers (CAN 2.0B-compatible), providing flexibility in network design and implementation. The onboard Philips TJA1054A transceiver supports Low-Speed/Fault-Tolerant CAN, and is fully compliant with the ISO 11898 standard, ensuring international operability and compatibility.
This model supports a baud rate of up to 125 Kbps, catering to the speed requirements of most automotive networking applications. Additionally, the Transceiver Mode Sleep Property feature allows the CAN port to enter a rest mode, reducing power consumption during periods of inactivity.
| Specification | Detail |
|---|---|
| Part Number | 193594A-01 (779707-01) |
| Category | Automotive Networking Products |
| Model | NI-9852 |
| Connector Type | Two 9-pin male D-Sub |
| Cable Requirement | Twisted pair |
| Common Pins (COM) | Two isolated, internally connected to the module’s isolated reference |
| Shield Pin (SHLD) | Optional, for shielded CAN cable |
| Maximum Nodes | Depends on electrical characteristics; more than 32 for Low-Speed/Fault-Tolerant CAN |
| Independent Slots | Two, each with Philips SJA1000 CAN controller and TJA1054A transceiver |
| CAN Identifier Support | 11 and 29 bit (CAN 2.0B-compatible) |
| Transceiver | Philips TJA1054A Low-Speed/Fault-Tolerant CAN, ISO 11898 standard compatible |
| Baud Rate Support | Up to 125 Kbps |
| Transceiver Mode Sleep Property | Configures CAN port to rest mode |
Question 1: What type of connectors does the NI-9852 have?
Answer 1: Two 9-pin male D-Sub connectors.
Question 2: What cable does the NI-9852 require for operation?
Answer 2: A twisted pair cable.
Question 3: Can the NI-9852 support more than 32 nodes?
Answer 3: Yes, depending on network’s electrical characteristics.
Question 4: Is the NI-9852 compatible with CAN 2.0B?
Answer 4: Yes, it supports 11 and 29 bit CAN identifiers.
Question 5: What is the maximum baud rate of the NI-9852?
Answer 5: Up to 125 Kbps.
