Description
The NI-9852 is a 2-Port Low-Speed/Fault Tolerant CAN Module, identified by its part number 196689A-01L (Also known as 779707-01). This module falls under the category of Automotive Networking Products, designed to facilitate robust communication within automotive networks.
The module features two 9-stick male D-Sub connectors for establishing connections. It is compatible with a twisted pair cable type, which is commonly used for CAN network configurations due to its ability to reduce noise and interference. Additionally, it includes two isolated COM pins connected internally, and an optional SHLD pin is available for those opting to use a shielded CAN cable, further enhancing its noise immunity capabilities.
With the ability to support more than 32 nodes, depending on the electrical characteristics of the network, the NI-9852 is versatile for various configurations and sizes of CAN networks. At its core, the module employs a Philips SJA1000 CAN controller, which is compatible with CAN 2.0B, and a Philips TJA1054A Low-Speed/Fault-Tolerant CAN transceiver, ensuring reliable communication even in environments where faults may occur.
Compliance with the ISO 11898 standard is a testament to its adherence to international requirements for CAN network communications. Furthermore, the module supports baud rates up to 125 Kbps, offering flexibility in terms of data transmission speeds based on the network’s needs.
In summary, the NI-9852 represents a reliable and versatile solution for low-speed, fault-tolerant CAN communication within automotive networks, backed by industry-standard components and specifications.
| Specification | Details |
|---|---|
| Part Number | 196689A-01L (Also known as 779707-01) |
| Category | Automotive Networking Products |
| Model | NI-9852 |
| Description | 2-Port Low-Speed/Fault Tolerant CAN Module |
| Connectors | Two 9-stick male D-Sub connectors |
| Cable Type | Twisted pair cable |
| Common Pins | Two isolated COM pins connected internally |
| Shield Pin | Optional SHLD pin for shielded CAN cable |
| Maximum Nodes | More than 32 nodes (depends on electrical characteristics) |
| CAN Controller | Philips SJA1000, CAN 2.0B-compatible |
| Transceiver | Philips TJA1054A Low-Speed/Fault-Tolerant CAN |
| Standards Compatibility | ISO 11898 standard |
| Supported Baud Rates | Up to 125 Kbps |
Question 1: What is the part number of the NI-9852?
Answer 1: 196689A-01L or 779707-01
Question 2: How many ports does the NI-9852 have?
Answer 2: 2 ports
Question 3: What type of cable does the NI-9852 use?
Answer 3: Twisted pair cable
Question 4: What is the maximum baud rate for the NI-9852?
Answer 4: Up to 125 Kbps
Question 5: Does the NI-9852 comply with ISO 11898 standard?
Answer 5: Yes
