Description
The National Instruments PC-DIO-24 Digital I/O Interface Board, part number 777368-01, falls under the category of Legacy DAQ Devices. This model, PC-DIO-24, is designed to serve as a bridge between digital signals and your computer, making it an essential component for a wide variety of applications that require digital input/output capabilities.
The interface of the PC-DIO-24 is dedicated to Digital I/O, ensuring seamless communication and control for digital signals. It boasts compatibility with TTL and CMOS signal levels, providing the flexibility needed to work with a broad spectrum of digital devices. The board connects through a 50-pin male ribbon-cable connector, offering a reliable and straightforward connection solution.
Performance-wise, the PC-DIO-24 can achieve a maximum transfer rate of up to 50 Kbytes/s, with a more typical constant transfer rate ranging between 1-10 Kbytes/s, catering to both high-speed and standard applications. It operates efficiently within a humidity range of 5% to 90% non-condensing, ensuring reliability in various environmental conditions.
The device operates safely within a voltage range of -0.5 to +5.5 V with respect to GND, protecting both the board and the devices connected to it. Additionally, the output voltage on pin 49 is regulated between 4.65 to 5.25 VDC, and it can supply a maximum current of 1 A, providing sufficient power for connected devices without the need for an external power supply.
| Specification | Detail |
|---|---|
| Part Number | 777368-01 |
| Category | Legacy DAQ Devices |
| Model | PC-DIO-24 |
| Description | National Instruments PC-DIO-24 Digital I/O Interface Board |
| Interface | Digital I/O |
| Compatibility | TTL, CMOS |
| Connection Type | 50-pin male ribbon-cable connector |
| Maximum Transfer Rate | 50 Kbytes/s |
| Typical Constant Transfer Rate | 1-10 Kbytes/s |
| Operating Humidity | 5% to 90% noncondensing |
| Max Voltage Rating | -0.5 to +5.5 V with respect to GND |
| Output Voltage (Pin 49) | 4.65 to 5.25 VDC |
| Max Current (Pin 49) | 1 A |
Question 1: What is the part number of the PC-DIO-24?
Answer 1: 777368-01
Question 2: What category does the PC-DIO-24 belong to?
Answer 2: Legacy DAQ Devices
Question 3: What is the max transfer rate of the PC-DIO-24?
Answer 3: 50 Kbytes/s
Question 4: What voltage range is safe for the PC-DIO-24?
Answer 4: -0.5 to +5.5 V
Question 5: Does the PC-DIO-24 need an external power supply?
Answer 5: No, it supplies up to 1 A on pin 49.
