Description
The PC-OPDIO-16 Optically Isolated DIO Board is a legacy DAQ device with the part number 777094-01. It is specially designed for use with NI-DAQ for Windows, offering a comprehensive solution for data acquisition tasks. This model, PC-OPDIO-16, features 8 input channels and 8 output channels, allowing for versatile configurations and setups depending on the application’s needs.
The device comes with support for cable termination accessory kits, specifically the CB-50 and CB-50LP, facilitating easy and secure connections for various setups. It boasts a software configurable design, enabling users to easily set it up in Plug and Play mode or Switchless Mode for enhanced flexibility and usability in different operational environments.
Regarding power requirements, it operates efficiently with a current requirement of 1.5 mA at 5 V and 7.0 mA at 24 V per channel, ensuring minimal power consumption while maintaining optimal performance. The device supports a data transfer rate of 1 kHz, suitable for various data acquisition and monitoring applications.
The PC-OPDIO-16 ensures safety and reliability with its 24 VDC isolation from computer ground, protecting both the device and the computer from potential electrical hazards. It can handle a maximum input voltage of 24 VDC or 24 VAC, offering considerable flexibility in terms of compatible power sources.
This model features multiple interfaces, including an address bus, data bus, Plug and Play interface, and control and support signals, ensuring comprehensive connectivity and compatibility with different systems and setups. With a 16 bits configuration (Two 8-bit ports for input and output), it provides ample data handling capability for a wide range of applications. Lastly, the device is compatible with LabWindows/C, offering additional versatility for users working in various computing environments.
| Specification | Detail |
|---|---|
| Part Number | 777094-01 |
| Category | Legacy DAQ Devices |
| Model | PC-OPDIO-16 |
| Description | PC-OPDIO-16 Optically Isolated DIO Board and NI-DAQ for Windows |
| Input Channels | 8 |
| Output Channels | 8 |
| Cable Termination Accessory Kits | CB-50, CB-50LP |
| Configuration | Software Configurable, Plug and Play Mode, Switchless Mode |
| Current Requirement | 1.5 mA at 5 V, 7.0 mA at 24 V per channel |
| Data Transfer Rate | 1 kHz |
| Isolation | 24 VDC from computer ground |
| Maximum Input Voltage | 24 VDC or 24 VAC |
| Interfaces | Address bus, Data bus, Plug and Play interface, Control and support signals |
| Bits Configuration | 16 bits (Two 8-bit ports for input and output) |
| Compatibility | LabWindows/C
Question 1: What is the part number of the PC-OPDIO-16? Question 2: How many input/output channels does PC-OPDIO-16 have? Question 3: What is the data transfer rate of the PC-OPDIO-16? Question 4: What power is required per channel at 5V for the PC-OPDIO-16? Question 5: Is the PC-OPDIO-16 compatible with LabWindows/C? Related Products |
