Description
The Part Number for this device is 778756-01, and it falls under the category of PXI Oscilloscopes/Digitizers. Specifically, the model in question is the PXI-5122. This particular model boasts a Bandwidth of 100 MHz and a Resolution of 14 bits, ensuring high-quality signal processing.
When it comes to performance, the PXI-5122 can achieve a Sampling Rate of 100 MS/s, with 2 Channels available for simultaneous signal acquisition. Each channel is equipped with 8 MB of memory, providing ample storage for data. The device showcases a Spurious Free Dynamic Range of 75 dBc and a Signal-to-Noise Ratio of 62 dB, indicating its efficiency in delivering clear and accurate measurements.
Another critical specification is the Input Impedance, which is Software selectable between 50 Ω or 1 MΩ. This flexibility allows for a wide range of signal types to be accurately measured. The Input Range of the device is quite broad, spanning from 200 mVpp to 20 Vpp, catering to various signal amplitudes.
There are Seven different Trigger Modes available, providing versatility in capturing signal events. The PXI-5122 is designed to operate within a temperature range of 0 to 55 °C, ensuring reliability under varied environmental conditions. It requires a Warm-up Time of 15 minutes before reaching optimal performance levels.
For maintenance, the device is Self-calibrated; however, an External calibration is recommended at least once in two years to maintain accuracy and performance. This ensures the device remains reliable and precise over its lifespan.
Question 1: What is the maximum bandwidth of the PXI-5122?
Answer 1: 100 MHz
Question 2: How many channels does the PXI-5122 have?
Answer 2: 2 channels
Question 3: What is the sampling rate of the PXI-5122?
Answer 3: 100 MS/s
Question 4: What memory capacity does each channel of the PXI-5122 have?
Answer 4: 8 MB
Question 5: Is external calibration recommended for the PXI-5122? If yes, how often?
Answer 5: Yes, every two years
