Description
The Part Number 190391F-02L corresponds to a high-performance device categorized under PXI Oscilloscopes/Digitizers. Specifically, this device is the PXI-5153 model, known for its exceptional capabilities in capturing electrical signals.
It operates at a Sample Rate of 2 GS/s, which can be enhanced up to 20 GS/s in ETS mode, providing users with the ability to capture fast and transient signals accurately. The device boasts a Bandwidth of 500 MHz, ensuring a wide range of signal frequencies can be analyzed.
Each channel is equipped with Onboard Memory of 64 MB, which is expandable. The Maximum Memory capacity available for this model is 256 MB, under the part number 780317-03, allowing for extensive data storage and analysis.
The Input Impedance is rated at 50 Ohms, suitable for a variety of signal sources. It can handle a Maximum Input Overload of 7 Vrms, protecting the device from potential damage caused by excessive signal voltages.
The Rise/Fall Time of the device is an impressive 600 ps, enabling the capture of rapid signal transitions. Additionally, it features a Bandwidth Limit Filter of 20 MHz, useful for reducing noise in signal measurements.
Its Input Ranges are quite flexible, spanning from 100 mV to 5 V, accommodating a broad spectrum of signal amplitudes. The Max Memory Depth achievable is 512 Mpts, which significantly enhances its data handling capacity.
The device entered its Maintenance Phase Start Date on December 30, 2022, indicating the manufacturer’s ongoing support for this model, ensuring reliability and performance consistency over time.
| Specification | Detail |
|---|---|
| Part Number | 190391F-02L |
| Category | PXI Oscilloscopes/Digitizers |
| Model | PXI-5153 |
| Sample Rate | 2 GS/s (20 GS/s in ETS mode) |
| Bandwidth | 500 MHz |
| Onboard Memory per Channel | 64 MB |
| Maximum Memory | 256 MB (Part Number: 780317-03) |
| Input Impedance | 50 Ohms |
| Maximum Input Overload | 7 Vrms |
| Rise/Fall Time | 600 ps |
| Bandwidth Limit Filter | 20 MHz |
| Input Ranges | 100 mV to 5 V |
| Max Memory Depth | 512 Mpts |
| Maintenance Phase Start Date | December 30, 2022 |
Question 1: What is the sample rate of PXI-5153?
Answer 1: 2 GS/s, up to 20 GS/s in ETS mode.
Question 2: What is the bandwidth of the PXI-5153?
Answer 2: 500 MHz.
Question 3: What is the maximum memory for the PXI-5153?
Answer 3: 256 MB.
Question 4: What is the input impedance of the PXI-5153?
Answer 4: 50 Ohms.
Question 5: When did the maintenance phase start for PXI-5153?
Answer 5: December 30, 2022.
