Description
The Part Number for this device is 778283-01, which falls under the category of RF Downconverters. Specifically, the model is identified as the PXI-5600. This model is notable for its Real-Time Bandwidth of 20 MHz, enabling it to handle a wide range of frequencies efficiently.
The Frequency Range of the PXI-5600 spans from 9 kHz to 2.7 GHz, providing a broad spectrum for various applications. In terms of noise management, it boasts a Noise Density of < -140 dBm/Hz and a Phase Noise of < -94 dBc/Hz at 10 kHz offset, ensuring clear signal processing and minimal interference.
When assessing performance in high signal environments, the Intermodulation Spurious-Free Dynamic Range is greater than 80 dB, highlighting its ability to maintain signal integrity. The Timebase Stability is rated at ±20 ppb with a Timebase Accuracy of ±50 ppb, indicating a high level of precision in timing-related operations.
For operation, the PXI-5600 requires specific Software Requirements including NI-RFSA 2.1, NIPXI-5600 Support driver, and an Application Development Environment (ADE) such as LabVIEW, LabWindows/CVI, Microsoft C/C++. The device features 6 Connectors (FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, INPUT), facilitating versatile connectivity options.
Optimal performance is achieved after a Recommended Warm-Up Time of 20 minutes, and to ensure continued accuracy, a Calibration Period of annually or every two years is advised. This comprehensive specification outlines the PXI-5600
| Specification | Detail |
|---|---|
| Part Number | 778283-01 |
| Category | RF Downconverters |
| Model | PXI-5600 |
| Real-Time Bandwidth | 20 MHz |
| Frequency Range | 9 kHz to 2.7 GHz |
| Noise Density | < -140 dBm/Hz |
| Phase Noise | < -94 dBc/Hz at 10 kHz offset |
| Intermodulation Spurious-Free Dynamic Range | > 80 dB |
| Timebase Stability | ±20 ppb |
| Timebase Accuracy | ±50 ppb |
| Software Requirements | NI-RFSA 2.1, NIPXI-5600 Support driver, ADE such as LabVIEW, LabWindows/CVI, Microsoft C/C++ |
| Connectors | 6 (FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, INPUT) |
| Recommended Warm-Up Time | 20 minutes |
| Calibration Period | Annually or every two years |
| Dimensions |
