Description
The product with the part number 778283-01 falls under the category of RF Downconverters. It is designated as the PXI-5600 model and is built in a 3U PXI Module form factor. This particular model offers a real-time bandwidth of 20 MHz and can operate across a frequency range from 9 kHz to 2.7 GHz. It boasts an impressive typical noise density of <-140 dBm/Hz and a spurious-free dynamic range of >80 dB.
In terms of performance, the PXI-5600 exhibits a typical phase noise of <-94 dBc/Hz at 10 kHz offset, ensuring high fidelity in signal processing. The timebase stability is marked at ±20 ppb, complemented by a frequency accuracy of ±50 ppb, guaranteeing precision in measurements.
To operate this module, the software requirements include NI-RFSA 2.1, NIPXI-5600 Support, and ADE (LabVIEW, LabWindows/CVI, Microsoft C/C++), providing users with a variety of software tools for data analysis and system integration. The connectors available on this device are FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, and INPUT, offering versatility in connectivity.
For optimal performance, it is recommended to allow a warm-up time of 20 minutes before use. Additionally, to ensure continued accuracy and reliability, a calibration period of annually is advised. This technical specification provides a comprehensive overview of the PXI-5600, showcasing its capability as a robust and precise RF downconverter suitable for a wide range of applications.
| Specification | Detail |
|---|---|
| Part Number | 778283-01 |
| Category | RF Downconverters |
| Model | PXI-5600 |
| Form Factor | 3U PXI Module |
| Real-Time Bandwidth | 20 MHz |
| Frequency Range | 9 kHz to 2.7 GHz |
| Typical Noise Density | <-140 dBm/Hz |
| Spurious-Free Dynamic Range | >80 dB |
| Typical Phase Noise | <-94 dBc/Hz at 10 kHz offset |
| Timebase Stability | ±20 ppb |
| Frequency Accuracy | ±50 ppb |
| Software Requirements | NI-RFSA 2.1, NIPXI-5600 Support, ADE (LabVIEW, LabWindows/CVI, Microsoft C/C++) |
| Connectors | FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, INPUT |
| Recommended Warm-Up Time | 20 minutes |
| Calibration Period | Annually
Question 1: What is the frequency range of the PXI-5600? Question 2: What is the typical noise density of the PXI-5600? Question 4: How long is the warm-up time for PXI-5600? Question 5: What is the calibration period recommended for the PXI-5600? |
