Description
The product with the part number 778283-01 falls under the category of RF Downconverters and is identified by the model PXI-5600. This device is designed to offer a real-time bandwidth of 20 MHz, which ensures high-quality signal processing capabilities.
It operates across a wide operating range from 9 kHz to 2.7 GHz, making it versatile for various RF applications. The noise density is exceptionally low at < -140 dBm/Hz, contributing to the device’s ability to deliver clear and precise measurements.
The Intermodulation Spurious-Free Dynamic Range is greater than 80 dB, ensuring that the device can handle a wide range of signal amplitudes without distortion. The phase noise performance is also noteworthy at < -94 dBc/Hz at a 10 kHz offset, which is indicative of the device’s ability to maintain signal purity and integrity.
Regarding stability and accuracy, the timebase stability is rated at ±20 ppb and the timebase accuracy at ±50 ppb, ensuring reliable performance over time. The device supports a range of software compatibility options including NI-RFSA 2.1, NIPXI-5600 Support driver software, LabVIEW, LabWindows/CVI, Microsoft C/C++, allowing for flexible integration into various systems.
The connectors included with this model are FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, INPUT, providing a comprehensive array of connection options for different RF setups. The warm-up time is approximately 20 minutes, after which the device operates at its optimum performance level. The recommended calibration period is annually or every two years, ensuring long-term reliability and accuracy.
| Specification | Detail |
|---|---|
| Part Number | 778283-01 |
| Category | RF Downconverters |
| Model | PXI-5600 |
| Real-Time Bandwidth | 20 MHz |
| Operating Range | 9 kHz to 2.7 GHz |
| Noise Density | < -140 dBm/Hz |
| Intermodulation Spurious-Free Dynamic Range | > 80 dB |
| Phase Noise | < -94 dBc/Hz at a 10 kHz offset |
| Timebase Stability | ±20 ppb |
| Timebase Accuracy | ±50 ppb |
| Software Compatibility | NI-RFSA 2.1, NIPXI-5600 Support driver software, LabVIEW, LabWindows/CVI, Microsoft C/C++ |
| Connectors | FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, INPUT |
| Warm-up Time | 20 minutes |
| Calibration Period | Annually or every two years |
| Dimensions | 3.
Question 1: What is the operating range of the PXI-5600? Question 2: What is the real-time bandwidth of the PXI-5600? Question 3: What is the noise density of the PXI-5600? Question 5: What is the PXI-5600’s calibration period? |
