Description
The part number 184996C-01 represents a PXI Digital Instrument, specifically the model PXI-6810. This device is a Serial Data Analyzer designed for use with both PCI and PXI Bus Computers. It connects via reserved lines on the CompactPCI J2 connector and supports a data rate of up to 10 Mb/s. The PXI-6810 is versatile, offering standardized and proprietary communication interfaces.
It is primarily applied in subsystem testing of cellular devices, base stations, CD-ROM drives, and other applications requiring analysis of arbitrary serial patterns. Installation of this device requires a 5V slot in either a PXI or CompactPCI chassis. For setup and testing, a software development environment setup is essential. The device software must be installed from a CD-drive, and it is crucial to power off the device before hardware installation.
The PXI-6810 has specific slot requirements, supporting bus master cards and bus arbitration. For front panel installation, it should be attached using screws to the PXI or CompactPCI chassis front panel mounting rails. Control of the device is facilitated through a soft front panel and the NI Serial Data Analyzer program group, which confirms installation. A self-test is required after setup to ensure proper functionality.
| Specification | Detail |
|---|---|
| Part Number | 184996C-01 |
| Category | PXI Digital Instruments |
| Model | PXI-6810 |
| Type | Serial Data Analyzer |
| Compatibility | PCI and PXI Bus Computers |
| Connection | Reserved lines on the CompactPCI J2 connector |
| Data Rate | 10 Mb/s |
| Communication Interfaces | Standardized and proprietary |
| Primary Applications | Subsystem testing of cellular devices, base stations, CD-ROM drives, and applications involving arbitrary serial patterns |
| Installation Requirement | 5V slot in a PXI or CompactPCI chassis |
| Software Development Environment Setup | Yes, required for setup and test |
| Device Software Installation | From CD-drive; Device power off required before hardware installation |
| Slot Requirement | Supporting bus master cards and bus arbitration |
| Front Panel Installation | Attach using screws to the PXI or CompactPCI chassis front panel mounting rails |
| Software Control | Soft front panel; NI Serial Data Analyzer program group for installation confirmation |
| Self-Test | Required after setup |
Question 1: What is the data rate of PXI-6810?
Answer 1: It supports up to 10 Mb/s.
Question 2: Does PXI-6810 require a specific slot voltage?
Answer 2: Yes, it requires a 5V slot.
Question 3: Can PXI-6810 be used with PCI bus computers?
Answer 3: Yes, it supports both PCI and PXI buses.
Question 4: What type of devices is the PXI-6810 used to test?
Answer 4: Cellular devices, base stations, CD-ROM drives.
Question 5: Is a software development environment needed for PXI-6810?
Answer 5: Yes, for setup and testing.
