Description
The National Instruments board, with the part number 180785-01, is a DMA and GPIB interface specifically designed for Macintosh NuBus computers.
This board supports eight 32-bit DMA channels and is equipped with an IEEE 488 standard, 24-pin I/O connector, facilitating data transfers up to 1 Mbyte/s. The implementation of PLA technology and the inclusion of a custom-integrated RTSI switch, which uses a crossbar switch for signal routing, make it a robust choice for demanding applications.
Compatibility with software such as LabVIEW, NI-DAQ for Macintosh, and NI-488.2 driver software enhances its versatility, allowing it to be utilized in various scenarios, including control, monitoring, measurement, and test applications. The board’s support for RTSI bus timing and interrupt capabilities further underscores its utility in integrated and optimized operations within these contexts.
| Feature | Description |
|---|---|
| Part Number | 180785-01 |
| Interface Type | DMA and GPIB |
| Manufacturer | National Instruments |
| Compatible Computers | Macintosh NuBus computers |
| Software Compatibility | LabVIEW, NI-DAQ software for Macintosh, NI-488.2 driver software |
| Bus Timing and Interrupt Support | RTSI bus timing and interrupt |
| Technology | PLA technology |
| DMA Channels | Eight 32-bit DMA channels |
| I/O Connector | IEEE 488 standard, 24-pin |
| Board-to-Board Trigger Signal Routing | Yes |
| RTSI Switch | Custom-integrated circuit that utilizes a crossbar switch |
| Maximum Data Transfer Rate | Up to 1 Mbytes/s |
| Applications | Control, monitoring, measurement, and test applications |
Question 1: What are the key functionalities and compatibilities of the National Instruments board with part number 180785-01 designed for Macintosh NuBus computers?
Answer 1: The National Instruments board with part number 180785-01 designed for Macintosh NuBus computers features eight 32-bit DMA channels, an IEEE 488 standard 24-pin I/O connector, PLA technology, a custom-integrated RTSI switch, and supports data transfer rates up to 1 Mbyte/s; it is compatible with LabVIEW, NI-DAQ for Macintosh, and NI-488.2 driver software, and is suitable for control, monitoring, measurement, and test applications due
Question 2: What features of the National Instruments board part number 180785-01, such as DMA channels, I/O connectors, and software compatibility, particularly enhance its performance for control and measurement applications on Macintosh NuBus computers?
Answer 2: The National Instruments board with part number 180785-01 is a DMA and GPIB interface designed for Macintosh NuBus computers, offering key functionalities such as eight 32-bit DMA channels, an IEEE 488 standard 24-pin I/O connector for data transfers up to 1 Mbyte/s, and PLA technology with a custom-integrated RTSI switch for robust signal routing; it is compatible with software like LabVIEW, NI-DAQ for Macintosh, and NI-488.2 driver
Question 3: What are the data transfer capabilities and software compatibilities of the National Instruments board part number 180785-01 designed for Macintosh NuBus computers?
Answer 3: The National Instruments 180785-01 DMA and GPIB interface board is suitable for integration into Macintosh NuBus computer-based control and test applications due to its eight 32-bit DMA channels, IEEE 488 standard 24-pin I/O connector enabling data transfers up to 1 Mbyte/s, and the use of PLA technology with a custom-integrated RTSI switch for efficient signal routing. Additionally, its compatibility with LabVIEW, NI-DAQ for Macintosh, and NI-488.2
Question 4: What are the main features and compatibility of the National Instruments board with part number 180785-01 designed for Macintosh NuBus computers?
Answer 4: The National Instruments board with part number 180785-01 enhances performance for control and measurement applications on Macintosh NuBus computers with its eight 32-bit DMA channels, IEEE 488 standard 24-pin I/O connector for fast data transfers up to 1 Mbyte/s, compatibility with LabVIEW, NI-DAQ for Macintosh, and NI-488.2 driver software, as well as its custom-integrated RTSI switch for optimized signal routing and support for RTSI bus timing and interrupts
Question 5: What are the specifications and software compatibility features that make the National Instruments 180785-01 DMA and GPIB interface board suitable for integration into Macintosh NuBus computer-based control and test applications?
Answer 5: The National Instruments board with part number 180785-01, designed for Macintosh NuBus computers, supports data transfers up to 1 Mbyte/s and is compatible with software such as LabVIEW, NI-DAQ for Macintosh, and NI-488.2 driver software, making it suitable for a variety of control, monitoring, measurement, and test applications.
