Description
The National Instruments PCI-7324 Motion Controller is a versatile device designed for precision control in open or closed-loop operation modes and is specifically built to manage stepper motors. It employs quadrature encoders for accurate velocity and position feedback and supports a variety of stepping modes, including micro-stepping, half, and full step resolutions. Fully compatible with PCI Local Bus Specifications, Revision 2.1, it ensures seamless integration with host computers.
Configuring the PCI-7324 is largely software-driven, allowing users to set I/O port directions and limit switch polarities digitally, although some configurations may require manual jumper adjustments. Installation is straightforward, requiring only a 5V PCI slot in the host system. The controller features two connectors: one 68-Pin Digital I/O and one 68-Pin Motion I/O, facilitating connectivity with various peripherals.
For advanced motion control, the controller utilizes trapezoidal profile control for precise point-to-point motion and allows users to adjust the acceleration factor to suit specific application requirements. Moreover, the PCI-7324 is capable of event-based motion profiling, with trigger buffers preloaded in its onboard memory for complex motion sequences.
Critical to its operation, the controller requires specific accessories, such as the UMI-7764 Universal Motion Interface and the SH68-C68-S Cable, to connect and interface with additional hardware. While the PCI-7324 has reached an obsolete status, it is still available for purchase and service through select providers, ensuring continued support for existing installations.
Question 1: What stepping modes does the National Instruments PCI-7324 Motion Controller support, and what other components are necessary for connecting it to additional hardware?
Answer 1: The required accessories for connecting the National Instruments PCI-7324 Motion Controller to additional hardware are the UMI-7764 Universal Motion Interface and the SH68-C68-S Cable.
Question 2: What type of motion control does the National Instruments PCI-7324 Motion Controller utilize for precise point-to-point motions and how is it configured for use with stepper motors?
Answer 2: The National Instruments PCI-7324 Motion Controller can be configured for various I/O port directions and limit switch polarities via software, requires a 5V PCI slot for installation, interfaces with host systems using PCI Local Bus Specifications, Revision 2.1, and necessitates specific accessories such as the UMI-7764 Universal Motion Interface and the SH68-C68-S Cable for full connectivity and integration with additional hardware.
Question 3: What are the required accessories for connecting the National Instruments PCI-7324 Motion Controller to additional hardware?
Answer 3: The National Instruments PCI-7324 Motion Controller is capable of open or closed-loop operation with stepper motors, using quadrature encoders for feedback and supporting multiple stepping modes; it integrates with host systems via a 5V PCI slot adhering to PCI Local Bus Specifications, Revision 2.1, and requires accessories like the UMI-7764 Universal Motion Interface and the SH68-C68-S Cable for connecting additional hardware.
Question 4: What are the capabilities and requirements for configuring and integrating the National Instruments PCI-7324 Motion Controller into a host system?
Answer 4: The National Instruments PCI-7324 Motion Controller utilizes trapezoidal profile control for precise point-to-point motions and is configured for use with stepper motors through software-driven settings for I/O port directions, limit switch polarities, and supports various stepping modes such as micro-stepping, half, and full steps.
Question 5: What are the capabilities and requirements for integrating the National Instruments PCI-7324 Motion Controller with host systems and additional hardware?
Answer 5: The National Instruments PCI-7324 Motion Controller supports micro-stepping, half, and full step resolutions as stepping modes, and it requires components such as the UMI-7764 Universal Motion Interface and the SH68-C68-S Cable to connect to additional hardware.
| Feature | Specification |
|---|---|
| Product Name | National Instruments PCI-7324 Motion Controller |
| Operation Mode | Open or Closed-loop |
| Type | Stepper Motor Motion Controller |
| Feedback | Quadrature Encoders for Velocity and Position |
| Stepping Modes | Micro-stepping, Half, and Full |
| Compatibility | PCI Local Bus Specs, Rev 2.1 |
| Configuration | Software-Accessible I/O Port Direction and Limit Switch Polarity, Some Jumper Adjustments |
| Installation | 5 V PCI Slot |
| Connectors | One 68-Pin Digital I/O, One 68-Pin Motion I/O |
| Motion Profile Control | Trapezoidal Profile Control for Point-to-Point Motion |
| Acceleration Control | Adjustable Acceleration Factor |
| Event-Based Motion Profiling | Yes, with Preloaded Trigger Buffers |
| Required Accessories | UMI-7764 Universal Motion Interface (777978-02), SH68-C68-S Cable (186381-0R5, 186381-01, 186381-02) |
| Obsolete Status |