Description
“`html
The National Instruments PXIe-5653 LO Module is identified by its part number 199861D-99L and falls under the category of Signal Generators. This particular model, the PXIe-5653, is designed to be compatible with the PXIe-5665 Vector Signal Analyzer. For optimal performance, it is required to be installed on the right side of the NI-5603 RF Downconverter.
The LO Module boasts a nominal frequency range for LO1 from 3.2 GHz to 8.3 GHz, with LO2 and LO3 having nominal frequencies of 4.0 GHz and 800 MHz respectively. The 100 MHz REF OUT Connection is intended for the CLK IN connector of the NI-5622 IF Digitizer, while the 10 MHz REF OUT Connection should be connected to the REF IN connector of the PXIe-5694.
This module is a 3U PXI Express module and requires 2 slots in the chassis for installation. It has a warm-up time of approximately 30 minutes and should be calibrated at least once every two years for reliable operation. The power requirements are 3.63 W (1.10 A) at +3.3 VDC and 48 W at +12 VDC, with a weight of 37.8 oz and dimensions of 8.5 x 1.6 x 5.1 inches.
The operational temperature range of this module is from 0 °C to 55 °C, ensuring performance stability in a variety of environments. Overall, the PXIe-5653 provides a robust solution for signal generation within the specified parameters.
“`
| Specification | Detail |
|---|---|
| Part Number | 199861D-99L |
| Category | Signal Generators |
| Model | PXIe-5653 |
| Description | National Instruments PXIe-5653 LO Module |
| Compatible with | PXIe-5665 Vector Signal Analyzer |
| Installation Requirement | Installed on the right side of the NI-5603 RF Downconverter |
| LO1 Nominal Frequency Range | 3.2 GHz to 8.3 GHz |
| LO2 Nominal Frequency | 4.0 GHz |
| LO3 Nominal Frequency | 800 MHz |
| 100 MHz REF OUT Connection | CLK IN connector of the NI-5622 IF Digitizer |
| 10 MHz REF OUT Connection | REF IN connector of the PXIe-5694 |
| Module Size | 3U PXI Express module |
| Slot Requirement | 2 slots in the chassis |
| Warm-up Time | ~30 minutes |
| Calibration Period | At least once every 2 years |
| Power Requirements | 3.63 W (1.10 A) at +3.3 VDC, 48 W at +12 VDC |
| Weight | 37.8 oz |
| Dimensions (inches) | 8.5 x 1.6 x 5.1 |
| Operating Temperature Range | 0 °C to 55 °C |
| Storage
Question 1: What is the part number of the PXIe-5653 LO Module? Question 2: How many slots does the PXIe-5653 require? Question 3: What is the warm-up time for the PXIe-5653? Question 4: What is the nominal frequency range for LO1 of PXIe-5653? Question 5: How often should the PXIe-5653 be calibrated? Related Products |
