PXI-7954R

Description

The National Instruments PXI-7954R is an FPGA Module for FlexRIO with Part Number 780563-01 that features a Virtex-5 LX110 FPGA and offers a rich set of capabilities. This module provides 66 differential general purpose I/O pairs which can be adapted as 132 single-ended signals for flexible connectivity options.

It comes equipped with two separate 64 MB banks of onboard DRAM to accommodate demanding memory requirements and supports a maximum configuration rate of 400 Mb/s for single-ended signals. The PXI-7954R is designed to be compatible with a range of operating systems including Windows XP Pro x32 SP1/2, Windows 7, and Windows Vista.

To ensure full functionality, several components are required: a compatible chassis and controller, at least one cable for signal connection, LabVIEW, NI FlexRIO Adapter Module Support, the NI-RIO driver, and the LabVIEW FPGA Module. An optional addition is the LabVIEW Real-Time Module.

With regards to software compatibility, only FPGA modules will appear in the Measurement & Automation Explorer (MAX), whereas adapter modules will not be shown. This module is packed with features such as single-cycle Timed Loop, arbitration, and FPGA base clocks, which enhance its capabilities in various applications.

The PXI-7954R requires a FlexRIO Adapter Module for signal input/output tasks but can operate without one when used for peer-to-peer streaming or coprocessing. Finally, despite the mature status announcement made by National Instruments, the module remains available for purchase and repairs through Apex Waves.

Question 1: What are the memory specifications and operating system compatibility of the National Instruments PXI-7954R FPGA Module with Part Number 780563-01?
Answer 1: The National Instruments PXI-7954R FPGA Module is compatible with Windows XP Pro x32 SP1/2, Windows 7, and Windows Vista operating systems.

Question 2: What operating systems are compatible with the National Instruments PXI-7954R FPGA Module?
Answer 2: The National Instruments PXI-7954R FPGA Module, with Part Number 780563-01, features two separate 64 MB banks of onboard DRAM and is compatible with Windows XP Pro x32 SP1/2, Windows 7, and Windows Vista operating systems.

Question 3: What are the system requirements and additional components needed to ensure full functionality of the National Instruments PXI-7954R FPGA Module?
Answer 3: To ensure full functionality of the National Instruments PXI-7954R FPGA Module, the system requirements include a compatible chassis and controller, at least one cable for signal connection, and software such as LabVIEW, NI FlexRIO Adapter Module Support, NI-RIO driver, and the LabVIEW FPGA Module, with the optional addition of the LabVIEW Real-Time Module; it also must be run on supported operating systems, which are Windows XP Pro x32 SP1/2, Windows 7,

Question 4: What type of FPGA is featured in the National Instruments PXI-7954R, and what operating systems is it compatible with?
Answer 4: The National Instruments PXI-7954R features a Virtex-5 LX110 FPGA and is compatible with operating systems Windows XP Pro x32 SP1/2, Windows 7, and Windows Vista.

Question 5: What operating systems are compatible with the National Instruments PXI-7954R FPGA Module for FlexRIO, and which components are required for its full functionality?
Answer 5: The National Instruments PXI-7954R FPGA Module for FlexRIO is compatible with Windows XP Pro x32 SP1/2, Windows 7, and Windows Vista operating systems, and for its full functionality, it requires a compatible chassis and controller, at least one cable for signal connection, LabVIEW, NI FlexRIO Adapter Module Support, the NI-RIO driver, the LabVIEW FPGA Module, and optionally, the LabVIEW Real-Time Module.

Related Products

AT-485-2

Shop Now

AT-5102

Shop Now

8M-8M Ethernet Cable

Shop Now

ALMA-10201

Shop Now