Description
The National Instruments SCB-100 Shielded Connector Block is a key accessory designed for enhancing the functionality and ease of use of DAQ (Data Acquisition) devices. With part numbers 182788-01, 776990-01, and 182788C-01, this device falls under the category of DAQ Device Accessories.
The SCB-100 is compatible with a wide range of devices, including E Series MIO devices, DIO devices, TIO Series devices, and others that utilize a 100-pin male 0.050 series shielded D-type I/O connector. This broad compatibility ensures that users can leverage the SCB-100 across various configurations and setups, making it a versatile choice for different applications.
Among its standout features are 100 screw terminals that provide ample connection points for sensors and actuators, a strain relief bar for improved cable management, three general purpose breadboard areas for prototyping or additional circuit assembly, chassis ground terminals for safety and noise reduction, and an incorporated reference temperature sensor that enhances the device’s utility in temperature-sensitive applications.
To connect with E Series/MIO devices or DIO/TIO Series devices, the SCB-100 requires either an SH100100 cable or an SH100-100-F cable, respectively. This ensures a secure and reliable connection between the SCB-100 and the DAQ devices it supports. The connector block is designed to work with wire gauges of ≤26 AWG, allowing for flexibility in the selection of wires for different applications.
The built-in temperature sensor of the SCB-100 outputs 10 mV/°C, with an accuracy of ±0.5 °C, providing precise temperature measurements that can be crucial in many DAQ applications. Moreover, the device has a modest current draw of no more than 10 mA at +5 VDC, making it an efficient addition to any setup.
With a weight of 15.6 oz and
| Specification | Detail |
|---|---|
| Part Number | 182788-01, 776990-01, 182788C-01 |
| Model | SCB-100 |
| Category | DAQ Device Accessories |
| Description | National Instruments SCB-100 Shielded Connector Block |
| Compatibility | E Series MIO devices, DIO devices, TIO Series devices, and others with a 100-pin male 0.050 series shielded D-type I/O connector |
| Features | 100 screw terminals, strain relief bar, 3 general purpose breadboard areas, chassis ground terminals, incorporated reference temperature sensor |
| Required Cable | SH100100 cable for E Series/MIO devices or SH100-100-F cable for DIO/TIO Series devices |
| Wire Gauge | ≤26 AWG |
| Temperature Sensor Output | 10 mV/°C with ±0.5 °C accuracy |
| Current Draw | No more than 10 mA at +5 VDC |
| Weight | 15.6 oz |
| Dimensions | 7.7 x 6.0 x 1.8 in. |
| Operating Temperature Range | 0 to 70 °C |
