Description
The SCB-100 is a Shielded Connector Block designed to facilitate easy, efficient, and secure connections for DAQ (Data Acquisition) Device Accessories. This connector block is identified by its part numbers 182790A-01, 776990-01, and 182788C-01, symbolizing its versatility and compatibility with a range of devices.
The SCB-100 is primarily compatible with E Series MIO devices such as NI 6025E, 6031E, 6071E, 6033E, and DIO devices including NI 6511, 6508, PCI-DIO-96, 6509, 6512, 6514, 6513, 6527, 6515, among others. Additionally, it supports TIO Series devices like the NI 6624, making it an essential component for users of National Instruments hardware.
This connector block features 100 screw terminals, which allow for the connection of a wide array of signals and sensors. The required cables for connection are SH100100 for E Series/MIO devices and SH100-100-F for DIO/TIO Series devices, ensuring a secure and reliable link between the SCB-100 and the devices it supports.
Designed for use with wire gauges of ≤26 AWG, the SCB-100 also boasts of special features that enhance its functionality. These include a reference temperature sensor, a strain relief bar, three general purpose breadboard areas, and chassis ground terminals. Such features not only extend the capabilities of the SCB-100 but also ensure its adaptability in various application scenarios.
Moreover, the SCB-100 is equipped with a cold-junction sensor output of 10 mV/°C with ±0.5 °C accuracy, ensuring precise temperature measurements. It has a current draw of ≤10 mA at +5 VDC, highlighting its efficiency and low power consumption. Despite its robust features, the SCB-100 maintains a lightweight design, weighing in at 15
| Specification | Detail |
|---|---|
| Part Number | 182790A-01, 776990-01, 182788C-01 |
| Category | DAQ Device Accessories |
| Model | SCB-100 |
| Description | Shielded Connector Block |
| Compatibility | E Series MIO devices (NI 6025E, 6031E, 6071E, 6033E), DIO devices (NI 6511, 6508, PCI-DIO-96, 6509, 6512, 6514, 6513, 6527, 6515 etc.), TIO Series devices like NI 6624 |
| Screw Terminals | 100 |
| Required Cable | SH100100 for E Series/MIO devices, SH100-100-F for DIO/TIO Series devices |
| Wire Gauge | ≤26 AWG |
| Special Features | Reference temperature sensor, Strain relief bar, 3 general purpose breadboard areas, Chassis ground terminals |
| Cold-Junction Sensor Output | 10 mV/°C with ±0.5 °C accuracy |
| Current Draw | ≤10 mA at +5 VDC |
| Weight | 15.6 oz |
