Description
The SCB-68 is a versatile DAQ device accessory with the part number 182469-01B. It is also known by alternative part numbers 776844-01 and 782914-01, ensuring wide compatibility and easy replacement options. This product falls under the category of DAQ Device Accessories, specifically designed to enhance the functionality and utility of DAQ devices.
Manufactured by National Instruments, the SCB-68 is compatible with a broad range of 68-pin X Series, M Series, E Series, B Series, S Series, R Series DAQ devices, marking it as a highly versatile component suitable for various data acquisition tasks. Among its notable features are an onboard cold-junction compensation sensor, two general-purpose breadboard areas, screw terminals, and sockets for electrical components, all of which significantly expand the potential use cases of the DAQ devices it accompanies.
The temperature sensor output and accuracy of the SCB-68 are rated at ±1.0 °C over a 0 to 110 °C range with an output of 10 mV/°C, ensuring precise temperature measurements. Power requirements are modest, with a typical consumption of 1 mA at +5 VDC and a maximum draw of 800 mA from the host computer, making it an energy-efficient addition to any setup.
Designed to accommodate a wide range of wire gauges, from 14-30 AWG, and equipped with a 68-pin male SCSI I/O connector, the SCB-68 ensures easy and secure connections. Its physical dimensions are 7.7 x 6.0 x 1.8 inches, and it weighs 13 oz, making it compact and lightweight enough to fit in most configurations without issue. Lastly, it operates optimally within a temperature range of 0 to 70 °C, ensuring reliable performance in various environmental conditions.
| Specification | Detail |
|---|---|
| Part Number | 182469-01B |
| Alternative Part Numbers | 776844-01, 782914-01 |
| Category | DAQ Device Accessories |
| Model | SCB-68 |
| Manufacturer | National Instruments |
| Compatibility | 68-pin X Series, M Series, E Series, B Series, S Series, R Series DAQ devices |
| Features | Onboard cold-junction compensation sensor, two general-purpose breadboard areas, screw terminals, sockets for electrical components |
| Temperature Sensor Output and Accuracy | ±1.0 °C over a 0 to 110 °C range and 10 mV/°C |
| Power Requirement | Typical: 1 mA at +5 VDC, Maximum: 800 mA from host computer |
| Wire Gauge | 14-30 AWG |
| Connector Type | 68-pin male SCSI I/O connector |
| Physical Dimensions | 7.7 x 6.0 x 1.8 in |
| Weight | 13 oz |
| Operating Temperature Range | 0 to 70 °C
Question 1: What are the alternative part numbers for SCB-68? Question 2: Is the SCB-68 compatible with E Series DAQ devices? Question 3: What’s the accuracy of SCB-68’s temperature sensor? Question 4: What is the power consumption of the SCB-68? Question 5: What type of connector does the SCB-68 use? |
