Description
The 777459-50 is a part of the SCXI & Legacy category, identified specifically by the model SCC-AO10. This device is designed for precision applications, providing a 1-Channel Isolated Analog Output with capabilities of up to 10 V and 30 mA. It’s uniquely engineered to support an output voltage range of ± 10 volts, which can be extended up to ± 20 volts when two modules are utilized together.
Compatibility is a key feature of this device, as it is designed to work seamlessly with E/M Series DAQ devices. Furthermore, it boasts an impressive isolation characteristic, with an Isolated Ground and a common mode of 60 VDC, ensuring the safety and reliability of your data acquisition processes.
The current drive capacity of this device is ± 30 mA, combined with a nonlinearity (gain) of 0.5 % at full-scale output range, guaranteeing precise and accurate outputs. Additionally, the output noise (RMS) is maintained at a typical 2.5 mV, with a maximum threshold of 4 mV, ensuring minimal signal distortion.
Another noteworthy feature is its Short Circuit Protection, which can handle up to 37 mA for an unlimited duration, providing an added layer of security for your operations. Lastly, to achieve the best calibration results, a recommended warm-up time of 30 minutes is advised, ensuring that the device operates at its highest efficiency.
| Specification | Detail |
|---|---|
| Part Number | 777459-50 |
| Category | SCXI & Legacy |
| Model | SCC-AO10 |
| Description | 1-Channel Isolated Analog Output (10 V, 30 mA) |
| Output Voltage Range | ± 10 volts (up to ± 20 volts with two modules) |
| Compatibility | E/M Series DAQ device |
| Isolation | Isolated Ground, 60 VDC common mode |
| Current Drive | ± 30 mA |
| Nonlinearity (Gain) | 0.5 % at full-scale output range |
| Output Noise (RMS) | Typical: 2.5 mV, Maximum: 4 mV |
| Short Circuit Protection | Up to 37 mA for an unlimited duration |
| Recommended Warm-Up Time | 30 minutes for calibration |
Question 1: What is the output voltage range of SCC-AO10?
Answer 1: ±10 volts, extendable to ±20 volts with 2 modules.
Question 2: What is the SCC-AO10’s compatibility?
Answer 2: Compatible with E/M Series DAQ devices.
Question 3: How much current can SCC-AO10 drive?
Answer 3: ±30 mA with precision.
Question 4: What is the isolation characteristic of SCC-AO10?
Answer 4: 60 VDC with an Isolated Ground.
Question 5: Does SCC-AO10 have short circuit protection?
Answer 5: Yes, up to 37 mA for unlimited duration.
