Description
The product with the Part Number 777459-50 falls under the SCXI & Legacy category, specifically modeled as SCC-AO10. This model is described as a 1-Channel Isolated Analog Output (10 V, 30 mA), designed to deliver high performance in various applications.
The Output Voltage Range of the SCC-AO10 can achieve ±10 volts, and it can extend up to ±20 volts when two modules are interconnected, offering flexibility in its usage. It is Compatible With E/M Series DAQ devices, ensuring a wide range of integration options for different system setups.
The device can handle a Common Mode Voltage Level of up to 60 VDC, making it robust for handling significant voltage levels. As for the Current Drive, it can manage ±30 mA, providing sufficient power for a variety of tasks. The Gain Nonlinearity is rated at 0.5 % (full-scale output range), indicating the precision of the module.
Concerning noise levels, the Output Noise (RMS) is typically around 2.5 mV, with a maximum of 4 mV, showcasing the module’s ability to operate quietly and efficiently. The device is also equipped with Short Circuit Protection capable of handling up to 37 mA for an unlimited duration, ensuring its longevity and reliability in challenging conditions.
Finally, the Calibration Warm-up Time is approximately 30 minutes, which is relatively short, allowing for quick setup and deployment of the device in various operational environments.
| Specification | Detail |
|---|---|
| Part Number | 777459-50 |
| Category | SCXI & Legacy |
| Model | SCC-AO10 |
| Description | 1-Channel Isolated Analog Output (10 V, 30 mA) |
| Output Voltage Range | ±10 volts (up to ±20 volts when two modules are connected) |
| Compatible With | E/M Series DAQ device |
| Common Mode Voltage Level | 60 VDC |
| Current Drive | ±30 mA |
| Gain Nonlinearity | 0.5 % (full-scale output range) |
| Output Noise (RMS) | Typical: 2.5 mV, Maximum: 4 mV |
| Short Circuit Protection | Up to 37 mA for an unlimited duration |
| Calibration Warm-up Time | 30 minutes |
Question 1: What is the output voltage range of the SCC-AO10?
Answer 1: ±10 volts, extendable to ±20 volts with two modules.
Question 2: Is the SCC-AO10 compatible with E/M Series DAQ devices?
Answer 2: Yes, it’s compatible with E/M Series DAQ devices.
Question 3: What is the common mode voltage level of SCC-AO10?
Answer 3: Up to 60 VDC.
Question 4: What is the SCC-AO10’s current drive capability?
Answer 4: ±30 mA.
Question 5: How long is the calibration warm-up time for SCC-AO10?
Answer 5: Approximately 30 minutes.
