Description
The SCXI-1126 is classified under SCXI & Legacy category, bearing the part number 184345C-01 (776572-26). This device is an Isolated Frequency Input Module designed to cater to a variety of frequency input needs. It features 8 channels, offering flexibility in monitoring multiple signals.
The module supports input frequency ranges from 250 kHz to 128 kHz, which are selectable to match the requirements of different applications. To ensure signal integrity, it incorporates four selectable, 4-pole lowpass filters with a range from 1Hz to 1 kHz. This feature aids in minimizing noise and improving the quality of the signal being processed.
With a maximum input signal capacity of 250 V, the SCXI-1126 is robust against high voltage inputs. Its isolation capability is up to 250 Vrms, which is critical for protecting the device and ensuring safe operation in electrically noisy environments. This module also boasts input overvoltage protection up to 250 Vrms, whether powered on or off, further enhancing its durability and reliability.
Connectivity options include a 50-pin male ribbon cable at the rear and a 32-pin male DIN C connector at the front, providing versatile connection solutions for various setups. The module is software programmable, with support for NI-DAQmx driver software, making it adaptable and easy to integrate into existing systems.
It is compatible with several Application Development Environments (ADEs) such as LabVIEW, LabWindows/CVI, and Measurement Studio. Configuration and management of the module are facilitated through the Measurement & Automation Explorer tool, allowing for streamlined setup and monitoring.
| Specification | Detail |
|---|---|
| Part Number | 184345C-01 (776572-26) |
| Category | SCXI & Legacy |
| Model | SCXI-1126 |
| Type | Isolated Frequency Input Module |
| Channels | 8 |
| Input Frequency Ranges | 250 kHz-128 kHz (Selectable) |
| Lowpass Filters | Four selectable, 4-pole (1Hz-1 kHz) |
| Maximum Input Signal | 250 V |
| Isolation | Up to 250 Vrms |
| Software Programmable | Yes |
| Input Overvoltage Protection | To 250 Vrms (powered on/off) |
| Connectors | 50-pin male ribbon cable (rear), 32-pin male DIN C (front) |
| Driver Software | NI-DAQmx |
| Compatible ADEs | LabVIEW, LabWindows/CVI, Measurement Studio |
| Configuration Tool | Measurement & Automation Explorer |
| Obsolete Status |
