Description
The product with the part number 776572-40 falls under the SCXI & Legacy category, identified as model SCXI-1140. It is described as an 8-Ch. Simultaneously Sampling Differential Amplifier, designed to cater to various signal amplification needs with its 8 channels. This model is compatible with NI-DAQmx, NB Series, LabVIEW for Macintosh, and NI-DAQ for Macintosh, ensuring a wide range of application support.
It features a maximum output voltage of ±10 V and a channel output slew rate of 15 V/µsec, indicating its capability to handle rapid changes in signal amplitude. Additionally, the input noise spectral density is rated at 12 nV/√Hz, while the output noise spectral density stands at 75 nV/√Hz, highlighting the amplifier’s efficiency in minimizing noise in signal processing.
For protection, it incorporates a 1 kΩ resistor in series as part of its input protection mechanism. The SCXI-1140 supports single module parallel and multiplexed scanning modes, enhancing its flexibility in data acquisition and instrumentation setups. It includes a read-only ID register (4-byte) and a write-only Configuration register (32-bit), facilitating device identification and configuration management.
The End of Life Status for this product has been announced by National Instruments but it remains available at Apex Waves, offering a valuable resource for users requiring this specific model for their applications.
| Specification | Details |
|---|---|
| Part Number | 776572-40 |
| Category | SCXI & Legacy |
| Model | SCXI-1140 |
| Description | 8-Ch. Simultaneously Sampling Differential Amplifier |
| Channels | 8 |
| Compatibility | NI-DAQmx, NB Series, LabVIEW for Macintosh, NI-DAQ for Macintosh |
| Maximum Output Voltage | ±10 V |
| Channel Output Slew Rate | 15 V/µsec |
| Input Noise Spectral Density | 12 nV/√Hz |
| Output Noise Spectral Density | 75 nV/√Hz |
| Input Protection | 1 kΩ resistor in series |
| Scanning Modes | Single module parallel and multiplexed scanning |
| Registers | ID register (read-only, 4-byte), Configuration register (write-only, 32-bit) |
| End of Life Status | Announced by National Instruments, available at Apex Waves |
Question 1: What is the maximum output voltage of SCXI-1140?
Answer 1: ±10 V
Question 2: Does SCXI-1140 support NI-DAQmx?
Answer 2: Yes, it is compatible with NI-DAQmx.
Question 3: How many channels does the SCXI-1140 have?
Answer 3: 8 channels
Question 4: What is the part number for SCXI-1140?
Answer 4: 776572-40
Question 5: Is the SCXI-1140 available after its End of Life announcement?
Answer 5: Yes, available at Apex Waves.
