Description
The product with a Part Number of 181715C-01 and an Alternate Part Number of 776572-81 falls under the Category of SCXI & Legacy. It is identified as model SCXI-1181, described as a Breadboard Custom Circuitry Module. This module includes a variety of components essential for its operation and installation, such as the module front panel, module front panel overlay, thumb screw (2.5 mm), #4 x 5/16 in. Phillips screw (flat head), enclosure base, module rear panel, #4 x 5/16 in. Phillips screw (pan head), enclosure cover, identification label, 3 x 32 position Deutsche Industrie Norme connector header, 50 position connector header, 4 x 6, 2 mm connector (push-fit), and an installation guide.
Regarding its connectivity capabilities, the module features a 96-pin DIN C-type front connector, a 50-pin right-angle male strip back-signal connector, and an SCXIbus connector. It boasts a Maximum Regulated Output Voltage (V+) of +15 V, with a Line Regulation of 0.02%/V typical and a Load Regulation of 0.3% typical. The Maximum Current Output is noted to be 170 mA, protected by 250 mA quick-acting fuses on V+ and V- supplies.
For programming compatibility, it supports various software including NIDAQ driver software, LabVIEW, LabWindows/CVI, and Borland C++. Despite its Obsolete Status being announced by National Instruments, it remains available for purchase and repairs through Apex Waves.
| Specification | Detail |
|---|---|
| Part Number | 181715C-01 |
| Alternate Part Number | 776572-81 |
| Category | SCXI & Legacy |
| Model | SCXI-1181 |
| Description | Breadboard Custom Circuitry Module |
| Module Components | Module front panel, module front panel overlay, thumb screw, 2.5 mm, #4 x 5/16 in. Phillips screw (flat head), enclosure base, module rear panel, #4 x 5/16 in. Phillips screw (pan head), enclosure cover, identification label, 3 x 32 position Deutsche Industrie Norme connector header, 50 position connector header, 4 x 6, 2 mm connector (push-fit), installation guide |
| Connectors | 96-pin DIN C-type front connector, 50-pin right-angle male strip back-signal connector, SCXIbus connector |
| Maximum Regulated Output Voltage (V+) | +15 V |
| Line Regulation | 0.02%/V typical |
| Load Regulation | 0.3% typical |
| Maximum Current Output | 170 mA |
| Fuses | 250 mA quick-acting fuses on V+ and V- supplies |
| Programming Compatibility | NIDAQ driver software, LabVIEW, LabWindows/CVI, Borland C++ |
| Obsolete Status | Announced by National Instruments; available for purchase and repairs by Apex Waves |
Question 1: What is the part number for SCXI-1181?
Answer 1: 181715C-01
Question 2: What category does SCXI-1181 belong to?
Answer 2: SCXI & Legacy
Question 3: Does SCXI-1181 support LabVIEW?
Answer 3: Yes, it supports LabVIEW.
Question 4: What is the maximum output voltage of SCXI-1181?
Answer 4: +15 V
Question 5: Is SCXI-1181 still available for purchase?
Answer 5: Yes, through Apex Waves.
