Description
The Part Number 777687-66 refers to a specific product within the PXI Switches category, known as the SCXI-1366. This product is described as the NI SCXI-1366 Terminal Block for SCXI-1166 Switch Module, indicating its primary function and compatibility with the SCXI-1166 Switch Module.
For effective utilization of the SCXI-1366 Terminal Block, certain equipment is required, including an SCXI chassis, the SCXI-1166 switch module, a #2 Phillips-head screwdriver, a 1/8 inch flathead screwdriver, a wire insulation stripper, and a wire cutter. These tools and components ensure the proper assembly and operation of the terminal block within its intended environment.
It is categorized under Measurement Category I, with a Maximum Signal Voltage specification of 150 V and a Maximum Impulse Voltage of 800 V. However, it is explicitly stated as Not Suitable For Categories II, III, IV, nor for MAINS supply circuits of 115 or 230 VAC, highlighting its specific application limitations.
To ensure safety, several precautions are recommended, such as avoiding touching exposed pins, using grounding methods, and storing the terminal block in an antistatic package when not in use. These precautions help mitigate the risk of electrical shock and damage to the equipment.
The SCXI-1366 is compatible with various software, including LabVIEW, LabWindows/CVI, and Measurement Studio, allowing for versatile use in different programming and measurement environments. Despite its Obsolete Status announced by National Instruments, it remains available from Apex Waves, providing an option for those in need of this specific terminal block for their SCXI-1166 Switch Module.
| Specification | Detail |
|---|---|
| Part Number | 777687-66 |
| Category | PXI Switches |
| Model | SCXI-1366 |
| Description | NI SCXI-1366 Terminal Block for SCXI-1166 Switch Module |
| Compatibility | SCXI-1166 Switch Module |
| Required Equipment | SCXI chassis, SCXI-1166 switch module, #2 Phillips-head screwdriver, 1/8 inch flathead screwdriver, wire insulation stripper, wire cutter |
| Measurement Category | I |
| Maximum Signal Voltage | 150 V |
| Maximum Impulse Voltage | 800 V |
| Not Suitable For | Categories II, III, IV; MAINS supply circuits of 115 or 230 VAC |
| Safety Precautions | Avoid touching exposed pins, use grounding methods, store in antistatic package when not in use |
| Software Compatibility | LabVIEW, LabWindows/CVI, Measurement Studio |
| Obsolete Status | Announced by National Instruments; available from Apex Waves |
Question 1: What is the part number for the NI SCXI-1366 Terminal Block?
Answer 1: 777687-66
Question 2: What tools are needed to use the SCXI-1366 Terminal Block?
Answer 2: #2 Phillips-head and 1/8 inch flathead screwdrivers, wire stripper, cutter.
Question 3: What is the maximum signal voltage of the SCXI-1366?
Answer 3: 150 V
Question 4: Is the SCXI-1366 compatible with MAINS supply circuits of 115 or 230 VAC?
Answer 4: No, it’s not suitable.
Question 5: Can the SCXI-1366 Terminal Block be used with LabVIEW?
Answer 5: Yes, it’s compatible with LabVIEW.
