Description
The part number 778716-01 refers to a product within the PXI Switches category, specifically the model SCXI-1377. This model is designed to be compatible with the SCXI-1130 Switch Module, functioning as a Front-Mounting Terminal Block.
It offers various configuration options to meet diverse needs, including a 256×1, 1-wire multiplexer; 128×1, 2-wire multiplexer; 64×1, 4-wire multiplexer; and options for Multiplexer or Matrix setups. To accommodate different types of wiring, it supports both spring terminals and screw terminals, with a wire recommendation of 28 AWG (ribbon or discrete).
For installation, specific tools are required, including a 1/8 inch flathead screwdriver, Philips screwdriver, wire cutter, and wire insulation stripper. The installation process involves several steps: Stripping insulation, removing the top cover, unsnapping the top cover, loosening strain-relief screws, placing wires, tightening strain-relief screws, and reinstalling the top cover.
| Specification | Detail |
|---|---|
| Part Number | 778716-01 |
| Category | PXI Switches |
| Model | SCXI-1377 |
| Compatible Module | SCXI-1130 Switch Module |
| Type | Front-Mounting Terminal Block |
| Configuration Options | 256×1, 1-wire multiplexer; 128×1, 2-wire multiplexer; 64×1, 4-wire multiplexer; Multiplexer or Matrix |
| Terminal Types | Spring terminals and screw terminals |
| Wire Recommendation | 28 AWG (ribbon or discrete) |
| Tools Required | 1/8 inch flathead screwdriver, Philips screwdriver, wire cutter, wire insulation stripper |
| Installation Steps | Strip insulation, remove top cover, unsnap top cover, loosen strain-relief screws, place wires, tighten strain-relief screws, install top cover |
Question 1: What does part number 778716-01 refer to?
Answer 1: SCXI-1377, a front-mounting terminal block for PXI Switches.
Question 2: Is SCXI-1377 compatible with SCXI-1130?
Answer 2: Yes, it’s designed for compatibility with SCXI-1130.
Question 3: What types of wiring does SCXI-1377 support?
Answer 3: Supports both spring and screw terminals, recommended 28 AWG wire.
Question 4: What tools are needed for SCXI-1377 installation?
Answer 4: 1/8 inch flathead, Philips screwdriver, wire cutter, and stripper.
Question 5: What configuration options does SCXI-1377 offer?
Answer 5: 256×1, 128×1, 64×1 multiplexers, and Multiplexer/Matrix setups.
