Description
The product features part numbers 190668B-01 and 190668-01, indicating variations or different batches of the same model. It falls under the NI SC Express category, which is a specification for National Instruments’ high-performance data acquisition systems. The specific model number for this product is SH96-96-1, denoting its unique design and capabilities within the product line.
This item is classified as a Shielded Analog Cable, designed to protect signal integrity by reducing noise interference in signal transmissions. It boasts an impressive bank isolation capability of Up to 300V, ensuring that different circuit sections are electrically isolated from each other to a substantial degree, enhancing safety and performance.
Available in variations of 1 m, 3 m, and 5 m lengths, this product offers flexibility in setup and installation, catering to different spatial requirements and configurations. It is capable of handling a maximum working voltage of 60 VDC, making it suitable for a wide range of low to medium voltage applications.
The cable is designed to support a maximum current of 250 mA for ISO_GND and PWR pins, and 50 mA for I/O pins, thus accommodating various power needs for connected devices. It utilizes a 22 AWG wire gauge for power and isolation pins, and a 28 AWG wire gauge for other pins, ensuring an optimal balance between electrical performance and physical flexibility.
Connection interfaces include 96-pin Type R male and 96-pin Type C female I/O Connectors, providing compatibility with a broad range of devices and systems. It is categorized under Measurement Category II, indicating its suitability for local-level electrical distribution such as appliances, portable equipment, and similar devices.
| Specification | Detail |
|---|---|
| Part Numbers | 190668B-01, 190668-01 |
| Category | NI SC Express |
| Model | SH96-96-1 |
| Type | Shielded Analog Cable |
| Bank Isolation | Up to 300V |
| Variations | 1 m, 3 m, 5 m |
| Maximum Working Voltage | 60 VDC |
| Maximum Current (ISO_GND and PWR pins) | 250 mA |
| Maximum Current (I/O pins) | 50 mA |
| Wire Gauge (Power and Isolation Pins) | 22 AWG |
| Wire Gauge (Other Pins) | 28 AWG |
| I/O Connectors | 96-pin Type R male, 96-pin Type C female |
| Measurement Category | II |
Question 1: What are the part numbers for SH96-96-1?
Answer 1: 190668B-01 and 190668-01
Question 2: What is the max working voltage of the SH96-96-1?
Answer 2: 60 VDC
Question 3: What cable lengths are available for SH96-96-1?
Answer 3: 1m, 3m, and 5m
Question 4: What is the bank isolation voltage of SH96-96-1?
Answer 4: Up to 300V
Question 5: What AWG is used for power pins in SH96-96-1?
Answer 5: 22 AWG
