Description
The product with the Part Number 142948-03 is categorized under PXI Source Measure Units. It is identified by the model SHDB62M-BW-LL. This item is a Cable Assembly, specifically an SHDB62M-BW-LL, characterized by its Low Leakage properties and comes in a length of 3 meters. It is designed to be compatible with National Instruments PXIe-4162 and PXIe-4163 Source Measure Units, making it an essential component for users of these particular systems.
The connection type of this cable assembly is a 62-Pin D-SUB Male Back End, which connects to the source measure unit, and a Bare Wire Male Front End, which allows for versatile connections to various test points or devices. It supports a Maximum Voltage of 60 VDC and a Maximum Current of 100 mA per channel, making it suitable for a wide range of measurement and testing applications.
For ensuring signal integrity and minimizing interference, the cable is equipped with an Outer Shield made of Braided wire for grounding, and an Inner Shield that consists of Foil insulation tied to Pin 10 (Output LO pin). This careful construction aids in maintaining the accuracy and reliability of measurements.
Aside from the 3m version, this cable assembly is also available in other lengths to accommodate different setup requirements: 1m (Part No. 142948-01) and 2m (Part No. 142948-02). These options provide flexibility in configuring setups with varying distance constraints between the PXI Source Measure Units and the devices or test points being measured.
| Specification | Details |
|---|---|
| Part Number | 142948-03 |
| Category | PXI Source Measure Units |
| Model | SHDB62M-BW-LL |
| Description | Cable Assembly, SHDB62M-BW-LL, Low Leakage, 3m |
| Compatibility | National Instruments PXIe-4162 and PXIe-4163 Source Measure Units |
| Connection Type | 62-Pin D-SUB Male Back End, Bare Wire Male Front End |
| Maximum Voltage | 60 VDC |
| Maximum Current | 100 mA per channel |
| Outer Shield | Braided wire for grounding |
| Inner Shield | Foil insulation tied to Pin 10 (Output LO pin) |
| Length | 3m |
| Other Available Lengths | 1m (Part No. 142948-01), 2m (Part No. 142948-02) |
Question 1: What is the max voltage for SHDB62M-BW-LL?
Answer 1: 60 VDC
Question 2: What is the length of the SHDB62M-BW-LL cable?
Answer 2: 3 meters
Question 3: Is the SHDB62M-BW-LL compatible with NI PXIe-4162?
Answer 3: Yes
Question 4: What type of connection is at the back end of the cable?
Answer 4: 62-Pin D-SUB Male
Question 5: What is the maximum current per channel?
Answer 5: 100 mA
