Description
The National Instruments SC-2043-SG Strain Gauge Accessory, with part number 777096-01, is a versatile tool compatible with both Mac and Windows operating systems. It is specifically designed for use with LabVIEW on Mac and LabVIEW or LabWindows/CVI on Windows, requiring the NI-DAQ driver software for optimal performance.
This accessory features 8 channels that support half-bridge completion and are equipped with quarter-bridge sockets and an offset nulling circuit, ensuring accurate measurements. Connection is made simple with its screw terminal design, while an amplifier gain of 10 and a buffered single pole 1.6 kHz filter ensure signal integrity.
An excitation voltage source is built into the SC-2043-SG, including screw terminal connections for optional external excitations, which are shared across all channels. The accessory is adeptly configured for interfacing with DAQ boards, featuring additional breakout screw terminals for straightforward signal termination of extra analog inputs/outputs, as well as digital and timing input/output lines.
Despite its obsolete status being announced by National Instruments, the SC-2043-SG remains available for purchase and repair through Apex Waves, ensuring long-term usage and support for existing setups.
| Specification | Detail |
|---|---|
| Product Name | National Instruments SC-2043-SG Strain Gauge Accessory |
| Part Number | 777096-01 |
| Manufacturer | National Instruments |
| Compatibility | Mac and Windows Operating Systems |
| Programming Software (Windows) | LabVIEW, LabWindows/CVI |
| Programming Software (Mac) | LabVIEW |
| Required Software | NI-DAQ Driver |
| Channels | 8 Channels with half-bridge completion, quarter-bridge sockets, offset nulling circuit |
| Connections | Screw Terminal |
| Amplifier Gain | 10 |
| Filter | Buffered single pole 1.6 kHz filter |
| Excitation Voltage Source | Available, with screw terminal connections for optional external excitations |
| Interface | Configured for DAQ board interfacing with additional breakout screw terminals |
| Obsolete Status | Announced by National Instruments, available for purchase and repair by Apex Waves |
Question 1: What software is required for optimal performance when using the National Instruments SC-2043-SG Strain Gauge Accessory with LabVIEW on Mac and LabWindows/CVI on Windows operating systems?
Answer 1: The SC-2043-SG Strain Gauge Accessory ensures accurate measurements with its 8 channels through features such as half-bridge completion, quarter-bridge sockets, an offset nulling circuit, an amplifier gain of 10, and a buffered single pole 1.6 kHz filter; despite its obsolete status, it can still be purchased and repaired through Apex Waves.
Question 2: What software and drivers are required to ensure optimal performance when using the National Instruments SC-2043-SG Strain Gauge Accessory on a Mac or Windows operating system?
Answer 2: The National Instruments SC-2043-SG Strain Gauge Accessory requires the NI-DAQ driver software for optimal performance when used with LabVIEW on Mac and LabWindows/CVI on Windows operating systems.
Question 3: What software and driver are required for the National Instruments SC-2043-SG Strain Gauge Accessory to perform optimally on Mac and Windows operating systems?
Answer 3: To ensure optimal performance when using the National Instruments SC-2043-SG Strain Gauge Accessory on a Mac or Windows operating system, the NI-DAQ driver software is required, and the accessory is designed for use with LabVIEW on Mac and with LabVIEW or LabWindows/CVI on Windows.
Question 4: What software requirements and channel specifications are notable in the SC-2043-SG Strain Gauge Accessory designed for use with LabVIEW and LabWindows/CVI?
Answer 4: The National Instruments SC-2043-SG Strain Gauge Accessory requires LabVIEW software on Mac, and both LabVIEW and LabWindows/CVI on Windows, in conjunction with the NI-DAQ driver software, to perform optimally on their respective operating systems.
Question 5: What capabilities does the SC-2043-SG Strain Gauge Accessory provide for ensuring accurate measurements with its 8 channels, and through which vendors can it still be purchased despite its obsolete status?
Answer 5: The SC-2043-SG Strain Gauge Accessory requires the NI-DAQ driver software for optimal performance, is compatible with LabVIEW on Mac, and can be used with both LabVIEW and LabWindows/CVI on Windows, featuring 8 channels that support half-bridge completion, quarter-bridge sockets, and an offset nulling circuit for accurate measurements.
