SCXI-1346

Description

The National Instruments SCXI-1346 Multi-Chassis Cable Adapter, with Part Number 776574-46, is designed to link multiple SCXI chassis to a single DAQ device effectively. It is compatible with a range of SH68-68-EP shielded cables, including lengths of 1 m (Part Number 184749-01), 2 m (Part Number 184749-02), 5 m (Part Number 184749-05), and 10 m (Part Number 184749-10), ensuring flexible connectivity options for different system configurations.

For secure installation, the Cable Adapter includes a mounting bracket that affixes it reliably to the SCXI chassis. This Adapter is well-equipped with a variety of connectors, including two 68-pin male connectors designated for chaining to the next chassis and for receiving signals from the DAQ board or previous chassis, along with a 50-pin male breakout connector on the printed-circuit board, and a 50-pin female connector on the back for comprehensive connectivity solutions.

Setting up a multi-chassis system with the SCXI-1346 requires a computer, a small flathead screwdriver, 68-pin shielded cables, a 68-pin E Series DAQ device, an SCXI 1001 or SCXI 1000 Chassis (revision K or higher), appropriate SCXI modules for each chassis (excluding SCXI-1127, SCXI-1190, and SCXI-1191), the SCXI 1349 shielded cable assembly, and the SCXI-1346 Installation Guide for a successful setup.

It is important to note that the total cable length should not exceed 10 meters in a multi-chassis SCXI system to maintain reliable operation and signal integrity.

Question 1: What are the specific models and revision requirements for successfully setting up a multi-chassis system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter?
Answer 1: To successfully set up a multi-chassis system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter, you need an SCXI 1001 or SCXI 1000 Chassis with revision K or higher, and appropriate SCXI modules for each chassis, excluding models SCXI-1127, SCXI-1190, and SCXI-1191.

Question 2: What are the essential components and guidelines for setting up a multi-chassis system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter?
Answer 2: The specifications and requirements for setting up a multi-chassis system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter include using SH68-68-EP shielded cables in lengths of 1, 2, 5, or 10 meters, a compatible 68-pin E Series DAQ device, an SCXI 1001 or SCXI 1000 Chassis (revision K or higher), suitable SCXI modules (excluding SCXI-1127, SCXI-

Question 3: What are the specifications and requirements for setting up a multi-chassis system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter?
Answer 3: To set up a multi-chassis SCXI system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter, you will need a computer, a small flathead screwdriver, 68-pin shielded cables, a 68-pin E Series DAQ device, an SCXI 1001 or SCXI 1000 Chassis (revision K or higher), appropriate SCXI modules for each chassis (excluding SCXI-1127, SCXI-1190, and SCXI-

Question 4: What components are required for setting up a multi-chassis SCXI system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter, and what is the maximum cable length recommended for maintaining signal integrity?
Answer 4: To set up a multi-chassis system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter, one needs a computer, a small flathead screwdriver, 68-pin shielded cables, a 68-pin E Series DAQ device, an SCXI 1001 or SCXI 1000 Chassis (revision K or higher), appropriate SCXI modules (excluding SCXI-1127, SCXI-1190, and SCXI-1191), the SCXI

Question 5: What components and tools are necessary for setting up a multi-chassis SCXI system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter?
Answer 5: To set up a multi-chassis SCXI system using the National Instruments SCXI-1346 Multi-Chassis Cable Adapter, one needs a computer, a small flathead screwdriver, 68-pin shielded cables, a 68-pin E Series DAQ device, an SCXI 1001 or SCXI 1000 Chassis (revision K or higher), suitable SCXI modules (excluding SCXI-1127, SCXI-1190, and SCXI-1191), the