SHC68-C68-S

Description

The National Instruments SHC68-C68-S Cable is a specialized, shielded cable assembly designed for connecting NI motion controllers like the NI-63xx (X Series) and NI-62xx (M Series) to various compatible devices, such as NI MID-76xx, MCA-7724, UMI-7774, and UMI-7772. This cable features a VHDCI connector and is intended for use in switching and motion applications.

Constructed with a 30 AWG signal and +5 V wires, the cable has an outer diameter of 0.380 in. and a minimum bend radius of 4.6 in., ensuring flexibility and durability in installation. The SHC68-C68-S is available in lengths of 2 meters (part number 186380-02) and 0.5 meters (part number 186380-0R5), catering to different spatial requirements.

Each cable end features a 68-pin VHDCI offset male connector, providing a reliable connection between controllers and motion interfaces. The inclusion of twisted pairs within the cable aids in reducing electrical noise and improving signal integrity. It is important to note that this cable should only be used with DAQ products when it is specifically recommended.

Question 1: What types of connectors are found on each end of the National Instruments SHC68-C68-S Cable, and what specific DAQ products are recommended for use with this cable?
Answer 1: Each end of the National Instruments SHC68-C68-S Cable features a 68-pin VHDCI offset male connector, and it is recommended for use with specific DAQ products such as the NI-63xx (X Series) and NI-62xx (M Series), as well as with motion interfaces like the NI MID-76xx, MCA-7724, UMI-7774, and UMI-7772.

Question 2: What is the minimum bend radius of the National Instruments SHC68-C68-S Cable, and what are its available lengths and corresponding part numbers?
Answer 2: The National Instruments SHC68-C68-S Cable is designed to connect NI motion controllers such as the NI-63xx (X Series) and NI-62xx (M Series) with compatible devices, including NI MID-76xx, MCA-7724, UMI-7774, and UMI-7772, for use in switching and motion applications.

Question 3: What are the construction features and recommended applications of the National Instruments SHC68-C68-S Cable, and for which specific devices is it intended to be used?
Answer 3: The National Instruments SHC68-C68-S Cable is a shielded cable assembly with a 30 AWG signal and +5 V wires, featuring a 0.380 in. outer diameter and a minimum bend radius of 4.6 in., designed for use in switching and motion applications. It is intended to connect NI motion controllers, specifically the NI-63xx (X Series) and NI-62xx (M Series), to compatible devices like the NI MID-76xx, M

Question 4: What is the purpose of the National Instruments SHC68-C68-S Cable and which devices is it designed to connect with?
Answer 4: The National Instruments SHC68-C68-S Cable is designed for connecting NI motion controllers, specifically the NI-63xx (X Series) and NI-62xx (M Series), to devices like NI MID-76xx, MCA-7724, UMI-7774, and UMI-7772, and is intended for use in switching and motion applications; its flexibility is ensured by a 30 AWG signal and +5 V wires with a minimum bend radius of 4

Question 5: What are the intended use cases and specific DAQ product compatibility details for the National Instruments SHC68-C68-S Cable, and what features contribute to its flexibility and signal integrity?
Answer 5: The National Instruments SHC68-C68-S Cable has a minimum bend radius of 4.6 inches and is available in lengths of 2 meters with part number 186380-02, and 0.5 meters with part number 186380-0R5.

Specification	Detail
Product Name	National Instruments SHC68-C68-S Cable
Part Numbers	186380-02, 186380-0R5
Compatible Controllers	NI-63xx (X Series), NI-62xx (M Series)
Compatible Devices	NI MID-76xx, MCA-7724, UMI-7774, UMI-7772
Connection Type	VHDCI Connector
Cable Type	Shielded Cable Assembly
Intended Applications	Switching and Motion
Wire Gauge	30 AWG Signal and +5 V Wires
Outer Diameter	0.380 in.
Bend Radius	4.6 in.
Cable Lengths	2 m (186380-02), 0.5 m (186380-0R5)
Connector Type	68-pin VHDCI offset male to 68-pin VHDCI offset male
Twisted Pairs	Yes
Use with DAQ Products	Only when recommended