Description
The USB-6366 is a highly versatile and powerful PC-based Multifunction DAQ designed for a wide range of applications. This device is identified by several part numbers including 781445-01, 782264-01, 781445-02, 782263-01, 782262-01, and 150159C-02L, ensuring flexibility and variety for specific project requirements.
With its capability to handle 8 Simultaneous AI Channels, it offers ample bandwidth for complex data acquisition tasks. Additionally, it features 24 bidirectional DIO Channels and 2 AO Channels, providing a comprehensive solution for interfacing with a variety of sensors, actuators, and other devices.
The USB-6366 is equipped with 4 Counters/Timers, further enhancing its utility for precision measurements and control tasks. Its Analog Input FIFO Buffer Size can be configured to either 32 MS or 64 MS, allowing for efficient data handling and storage.
This DAQ device also features a Frequency Generator with a range from 100 kHz to 20 MHz and divisors ranging from 1-16, offering flexibility in generating a wide range of frequencies for testing and analysis purposes. The recommended Warm-Up Time for the USB-6366 is 15 minutes, ensuring accurate and reliable performance after a short preparation period.
For maintenance and longevity, a Calibration Interval of Every 2 years is advised to keep the device performing at its best. The USB-6366 operates within a Working Voltage of ±11 V (Category I), suitable for a wide range of industrial applications.
Environmental conditions are also well accommodated, with an Operating Humidity Range of 10% to 90% (non-condensing) and a Storage Humidity Range of 5% to 95% (non-condensing), ensuring durability and reliability in various working conditions.
| Specification | Detail |
|---|---|
| Part Number(s) | 781445-01, 782264-01, 781445-02, 782263-01, 782262-01, 150159C-02L |
| Category | PC-based Multifunction DAQ |
| Model | USB-6366 |
| Simultaneous AI Channels | 8 |
| DIO Channels | 24 bidirectional |
| AO Channels | 2 |
| Counters/Timers | 4 |
| Analog Input FIFO Buffer Size | 32 MS or 64 MS |
| Frequency Generator Range | 100 kHz to 20 MHz |
| Frequency Generator Divisors | 1-16 |
| Warm-Up Time | 15 minutes |
| Calibration Interval | Every 2 years |
| Working Voltage | ±11 V (Category I) |
| Operating Humidity Range | 10% to 90% (non-condensing) |
| Storage Humidity Range | 5% to 95% (non-condensing) |
