Description
The USB-6366 is a high-performance, PC-based multifunction DAQ device that is a part of the X Series with mass termination. The part number for this specific model is 151947D-02L. This device is designed to cater to a wide range of data acquisition and signal processing needs.
It features 8 differential analog input channels with an input voltage range of ±11 V, providing flexibility for various signal types. Additionally, there are 2 analog output channels available for signal generation or output functions. The device also includes 24 bidirectional digital I/O channels, allowing for extensive interfacing with external devices for control and monitoring purposes.
For timing and counting applications, the USB-6366 is equipped with 4 counters/timers, enhancing its capability to handle complex timing tasks. The analog input FIFO buffer size can be selected between 32 MS or 64 MS, facilitating high-speed data acquisition without data loss.
The frequency generator of this device has a range from 100 kHz to 20 MHz, suitable for a variety of signal generation requirements. A warm-up time of 15 minutes is recommended for optimal performance, and the calibration interval is set to every 2 years, ensuring sustained accuracy and reliability.
Operating this device requires a voltage of 11 V (Category I), and it can function within a humidity range of 10% to 90% (noncondensing) when in operation. For storage, the recommended humidity range is 5% to 95% (noncondensing), safeguarding the device from environmental conditions when not in use.
| Specification | Detail |
|---|---|
| Part Number | 151947D-02L |
| Category | PC-based Multifunction DAQ |
| Model | USB-6366 |
| Description | X Series DAQ Device with Mass Termination |
| Analog Input Channels | 8 differential |
| Analog Input Voltage Range | ±11 V |
| Analog Output Channels | 2 |
| Digital I/O Channels | 24 bidirectional |
| Counters/Timers | 4 |
| Analog Input FIFO Buffer Size | 32 MS or 64 MS |
| Frequency Generator Range | 100 kHz to 20 MHz |
| Warm-up Time | 15 minutes |
| Calibration Interval | Every 2 years |
| Operating Voltage | 11 V (Category I) |
| Operating Humidity Range | 10% to 90% (noncondensing) |
| Storage Humidity Range | 5% to 95% (noncondensing) |
