Description
The USB-6366 is a PC-based Multifunction DAQ device from NI, identified by part numbers 781445-01, 782264-01, 781445-02, 782263-01, and 782262-01. This device falls under the category of X Series DAQ Device with Mass Termination, offering a robust solution for data acquisition tasks.
It features 8 differential analog input channels and does not support single-ended configurations. The input voltage range for these channels is ±11 V, accommodating a wide range of signal types. In addition to analog inputs, the USB-6366 provides 2 analog output channels, allowing for precise control signals or stimuli to be generated.
For digital interfacing, this device boasts 24 bidirectional digital I/O channels, enabling complex digital communication and control setups. It also includes 4 counters/timers, enhancing its utility for timing, counting, and pulse generation tasks.
The analog input FIFO buffer size can be either 32 MS or 64 MS, supporting high-speed data logging and signal processing. The frequency generator range of 100 kHz to 20 MHz allows for a wide variety of signal generation capabilities, from low to high frequencies.
Before achieving optimal performance, the USB-6366 requires a warm-up time of 15 minutes. To maintain accuracy and reliability, it is recommended to calibrate the device every 2 years. It operates safely within a maximum working voltage of 11 V (Category I), ensuring protection against voltage spikes.
The operating humidity range for this device is 10% to 90% noncondensing, allowing it to function efficiently in a variety of environmental conditions without the risk of condensation affecting its performance.
| Specification | Detail |
|---|---|
| Part Number | 781445-01, 782264-01, 781445-02, 782263-01, 782262-01 |
| Category | PC-based Multifunction DAQ |
| Model | USB-6366 |
| Description | NI USB-6366, X Series DAQ Device with Mass Termination |
| Analog Input Channels | 8 differential, 0 single-ended |
| Input Voltage Range | ±11 V (for all ranges) |
| Analog Output Channels | 2 |
| Digital I/O Channels | 24 bidirectional |
| Counters/Timers | 4 |
| Analog Input FIFO Buffer Size | 32 MS or 64 MS |
| Frequency Generator Range | 100 kHz to 20 MHz |
| Warm-up Time | 15 minutes |
| Calibration Interval | Every 2 years |
| Maximum Working Voltage | 11 V (Category I) |
| Operating Humidity Range | 10% to 90% noncondensing |
