Description
The product with Part Numbers 142889D-02L, 784663-01, 784664-01 falls under the Category of Automotive Networking Products. It is identified by the Model USB-8506 and has a Short Description of USB-8506-LIN-2PORT. This particular model operates with a Interface that is based on the Local Interconnect Network (LIN), ensuring seamless connectivity and communication within automotive networks.
It is designed to be fully compatible with the NI-XNET driver, which is essential for integrating the device into existing systems without compatibility issues. One of the notable Features of this model is its support for nxReadState, which facilitates autonomous system checks, ensuring the system’s integrity and performance without constant manual oversight.
Initially, upon power-up, the device is in an Idle state, meaning it does not communicate with other Electronic Control Units (ECUs). However, after receiving a Start Trigger, it transitions from Idle to Active state, initiating communication and data exchange. Similarly, after an XNET Stop command, it transitions from either Active/Inactive back to Idle state, ensuring that the system can effectively manage its operational states for optimal performance and power management.
Furthermore, this model boasts Synchronization Capability, allowing it to be synchronized with M-Series DAQ MIO cards through routing. This feature is particularly important for complex systems that require precise timing and synchronization across multiple devices and systems for accurate data acquisition and control.
| Specification | Detail |
|---|---|
| Part Number | 142889D-02L, 784663-01, 784664-01 |
| Category | Automotive Networking Products |
| Model | USB-8506 |
| Short Description | USB-8506-LIN-2PORT |
| Interface | Local Interconnect Network (LIN) |
| Driver Compatibility | NI-XNET |
| Feature | Supports nxReadState for autonomous system checks |
| State on Power-Up | Idle (not communicating with other ECUs) |
| State Transition after Start Trigger | Idle to Active |
| State Transition after XNET Stop | Active/Inactive to Idle |
| Synchronization Capability | Can be synchronized with M-Series DAQ MIO card through routing |
Question 1: What are the part numbers for the USB-8506?
Answer 1: 142889D-02L, 784663-01, 784664-01
Question 2: What interface does the USB-8506 use?
Answer 2: Local Interconnect Network (LIN)
Question 3: Is the USB-8506 compatible with NI-XNET?
Answer 3: Yes, it’s fully compatible.
Question 4: What feature allows the USB-8506 to check system integrity?
Answer 4: nxReadState feature.
Question 5: Can the USB-8506 synchronize with M-Series DAQ MIO cards?
Answer 5: Yes, through routing.
