Description
The National Instruments cFP-1804 Ethernet/Serial Backplane, with part number 779490-01, offers versatile mounting options including panel mounting and compatibility with a standard 19 inch rack. For regulatory compliance, when utilized with UL Recognized I/O modules, it necessitates housing within a UL Listed NEMA or IP enclosure. Optimizing cooling efficiency is achieved by mounting the backplane with I/O module vents positioned at the top and bottom.
Communication rates for this device include 10 Mbps, 100 Mbps, and an auto-negotiated rate, serving a wide spectrum of network speeds. The backplane features four slots and is equipped with a network interface that supports both 10BaseT and 100BaseTX Ethernet, adhering to the IEEE802.3 standard. Moreover, it incorporates an RS-232 serial port interface accessible via a 9-pin D-SUB male-to-female straight-through cable.
Configuration of the cFP-1804 is streamlined through the use of the Measurement & Automation Explorer (MAX) tool. Accommodating a range of connectivity needs, the backplane is designed to work with a cFP-CB-x Connector Block or equivalent connectivity accessory for each I/O module. Compatibility with various software packages is ensured, including LabVIEW, LabVIEW Real-Time module, LabWindows/CVI, Measurement Studio, and VI Logger, enhancing its utility in diverse application development environments. Lastly, the backplane maintains a lightweight design, weighing in at only 2 lbs.
| Specification | Detail |
|---|---|
| Product Name | National Instruments cFP-1804 Ethernet/Serial Backplane |
| Part Number | 779490-01 |
| Mounting Options | Panel mount, 19 inch rack mountable |
| Compliance | UL Recognized, requires UL Listed NEMA or IP enclosure if used with UL Recognized I/O modules |
| Cooling Efficiency | Mount with I/O module vents at the top and bottom |
| Communication Rates | 10 Mbps, 100 Mbps, and auto-negotiated rate |
| Slots | 4-slot backplane |
| Network Interface | 10BaseT and 100BaseTX Ethernet, compatible with IEEE802.3 |
| Serial Port Interface | RS-232 via 9-pin D-SUB male-to-female straight-through cable |
| Configuration Tool | Measurement & Automation Explorer (MAX) |
| Connectivity Accessory | cFP-CB-x Connector Block or other connectivity accessory for each I/O module |
| Software Compatibility | LabVIEW, LabVIEW Real-Time module, LabWindows/CVI, Measurement Studio, VI Logger |
| Weight | 2 lbs |
Question 1: What is the recommended mounting orientation for the National Instruments cFP-1804 Ethernet/Serial Backplane to ensure optimal cooling efficiency?
Answer 1: The National Instruments cFP-1804 Ethernet/Serial Backplane offers panel mounting and compatibility with a standard 19-inch rack, and when used with UL Recognized I/O modules, it requires housing within a UL Listed NEMA or IP enclosure for regulatory compliance.
Question 2: What kind of enclosure is required for regulatory compliance when using UL Recognized I/O modules with the National Instruments cFP-1804 Ethernet/Serial Backplane?
Answer 2: For regulatory compliance, when using UL Recognized I/O modules with the National Instruments cFP-1804 Ethernet/Serial Backplane, it is required to house the system within a UL Listed NEMA or IP enclosure.
Question 3: What are the necessary conditions for regulatory compliance when using the National Instruments cFP-1804 Ethernet/Serial Backplane with UL Recognized I/O modules in terms of housing and enclosure requirements?
Answer 3: The recommended mounting orientation for the National Instruments cFP-1804 Ethernet/Serial Backplane to ensure optimal cooling efficiency is with the I/O module vents positioned at the top and bottom.
Question 4: What mounting options are available for the National Instruments cFP-1804 Ethernet/Serial Backplane, and what specific regulatory compliance is required when using it with UL Recognized I/O modules?
Answer 4: For regulatory compliance, when the National Instruments cFP-1804 Ethernet/Serial Backplane is used with UL Recognized I/O modules, it must be housed within a UL Listed NEMA or IP enclosure.
Question 5: What are the mounting options and the necessary regulatory housing requirements for the National Instruments cFP-1804 Ethernet/Serial Backplane, part number 779490-01?
Answer 5: The National Instruments cFP-1804 Ethernet/Serial Backplane, part number 779490-01, offers versatile mounting options including panel mounting and compatibility with a standard 19-inch rack, and for regulatory compliance, it requires housing within a UL Listed NEMA or IP enclosure when used with UL Recognized I/O modules.
