Description
The part number for this item is 153356A-01L / 782080-01, categorized under Powertrain Control Components. The model is the NI-9758, known as the DRIVVEN PFI Driver Module Kit. This product is designed to drive four low-and high-impedance port fuel injectors (PFI) and four general-purpose automotive solenoid valves.
The PFI Driver Control allows for timing, span, and two current stages to be individually controlled. Additionally, the Solenoid Driver is pulse-width modulation (PWM) controlled, allowing for a 0 to 100 percent duty cycle. One of the notable features of this product is its diagnostics capabilities, which include open- and short-circuit detection and reporting.
It requires a sensor heater that approximately consumes 2 A for the first 30 seconds and approximately 1 A thereafter. For optimal performance, an external power supply requirement is specified at 100 mA (max); it is recommended to use a battery or power supply with a 10A continuous output under full load. The module supports 4 channel low or high impedance drivers with a continuous duty of 1.5 A and can operate with an external power supply ranging from 7 V to 32 V.
| Specification | Detail |
|---|---|
| Part Number | 153356A-01L / 782080-01 |
| Category | Powertrain Control Components |
| Model | NI-9758 |
| Description | DRIVVEN PFI Driver Module Kit |
| Functionality | Drives four low-and high-impedance port fuel injectors (PFI) and four general-purpose automotive solenoid valves |
| PFI Driver Control | Timing, span, and two current stages individually controlled |
| Solenoid Driver | Pulse-width modulation (PWM) controlled, 0 to 100 percent duty cycle |
| Diagnostics | Features open- and short-circuit detection and reporting |
| Sensor Heater Requirement | Approx. 2 A for the first 30 seconds; approx. 1 A thereafter |
| External Power Supply Requirement | 100 mA (max); Battery or power supply with 10A continuous output recommended under full load |
| Channels | 4 channel low or high impedance drivers |
| Continuous Duty | 1.5 A |
| External Power Supply | 7 V to 32 V |
| PWM Frequency |
Question 1: What is the part number for the NI-9758? Question 2: What does the NI-9758 module support? Question 3: What are the diagnostics capabilities of NI-9758? Question 4: What is the sensor heater’s initial power consumption? Question 5: What external power supply requirement does NI-9758 have? |
