Description
The National Instruments NB-DIO-24 Digital I/O Board is a critical component in the realm of Legacy DAQ Devices, bearing the part number 180525-01C. This board is specifically designed for Macintosh NuBus, underlining its unique compatibility and specialized use. The model, NB-DIO-24, succinctly highlights its primary functionality and design focus.
The board is a key player in setups requiring precise digital input/output operations. It is adept at connecting to SC-206X Series equipment when paired with an SC-2051 Cable Adapter Board. Additionally, it boasts compatibility with the CB-50 Connector Block, the ER-8/16 Relay Accessory, the AT-DIO-32F Digital I/O Board, and the NB1 ribbon cable. Such versatility ensures that the NB-DIO-24 can integrate smoothly into a variety of configurations, making it a valuable asset for diverse applications.
Featuring three ports, each with eight digital lines, the board provides ample connectivity for multiple devices and accessories. This setup enables efficient data transmission and reception, ensuring reliable performance across various operations.
In terms of power allocation, the NB-DIO-24 is designed to support 2.0 A per slot, with an additional 1.0 A reserved for accessories. The board itself utilizes 0.8 A, a testament to its efficiency and the careful consideration given to its power requirements. This thoughtful power distribution underscores the board’s ability to operate effectively without imposing excessive demands on the system’s power resources.
Compatibility is further extended through the use of NI-DAQ driver software, which facilitates seamless integration and operation within the system. This software ensures that the board can perform at its best, providing users with a reliable and user-friendly experience.
It is important to note the board’s inclusion of handshaking circuitry for each port, a feature that enhances its communication capabilities. However, users should be aware that certain digital I/O lines (PB0 to PB3 and PA0) are reserved
| Part Number | 180525-01C |
|---|---|
| Category | Legacy DAQ Devices |
| Model | NB-DIO-24 |
| Short Description | CCA,NB-DIO-24 |
| Description | National Instruments NB-DIO-24 Digital I/O Board. A Digital I/O Board part of the NB Series designed for Macintosh NuBus. It can connect to SC-206X Series with SC-2051 Cable Adapter Board and used with CB-50 Connector Block, ER-8/16 Relay Accessory, AT-DIO-32F Digital I/O Board, and NB1 ribbon cable. Supports 2.0 A power per slot, 1.0 A for accessories, and uses 0.8 A. |
| Ports | 3 ports with eight digital lines each |
| Compatibility | SC-206X Series (with SC-2051 Cable Adapter), CB-50 Connector Block, ER-8/16 Relay Accessory, AT-DIO-32F Digital I/O Board, NB1 ribbon cable |
| Power Allocation | 2.0 A per slot, 1.0 A for accessories, 0.8 A used by board |
| Driver Software | NI-DAQ |
| Special Notes | Has handshaking circuitry for each port. Digital I/O lines PB0 to PB3 and PA0 are reserved for SCXI use in Multiplexed mode with an SCXI module. Not for multiple chassis applications. |
Question 1: What is the part number of the NB-DIO-24?
Answer 1: 180525-01C
Question 2: How many ports does the NB-DIO-24 have?
Answer 2: 3 ports
Question 3: What series is compatible with the NB-DIO-24?
Answer 3: SC-206X Series
Question 4: How much power does the NB-DIO-24 use?
Answer 4: 0.8 A
Question 5: Is the NB-DIO-24 compatible with NI-DAQ driver software?
Answer 5: Yes
