Description
The SCXI-1104C model falls under the SCXI & Legacy category and is identified by part numbers 183084H-05, 776572-04C, and 183087H-05. It features 32 differential channels with a cut-off frequency of 10 kHz. For multi-chassis system configurations, the SCXI-1346 adapter is required.
It offers several analog ground pin options, including Pin 1,2, 4, or 19, although it does not provide overvoltage protection; however, it is equipped with short-circuit protection. The recommended warm-up time for optimal performance is 20 minutes, and it operates within a temperature range of 0 to 50 °C. Calibration of the SCXI-1104C is recommended to be performed annually or as needed.
For software compatibility, it requires the NI-DAQ version 6.5.1 or higher, alongside an Application Development Environment such as LabVIEW, LabWindows/CVI, or Visual Basic for programming. Connection interfaces include a 50-pin male ribbon cable at the back and a 96-pin male DIN C connector at the front.
The model’s obsolete status has been announced, indicating that it may no longer be in production or supported in the near future. Calibration can be performed through NIST accredited (via 3rd party) services or basic in-house procedures.
| Specification | Detail |
|---|---|
| Part Number | 183084H-05, 776572-04C, 183087H-05 |
| Category | SCXI & Legacy |
| Model | SCXI-1104C |
| Channels | 32 differential |
| Cut-off Frequency | 10 kHz |
| Required Adapter for Multichassis System | SCXI-1346 |
| Analog Ground Pin Options | Pin 1,2, 4, or 19 |
| Overvoltage Protection | No |
| Short-circuit Protection | Yes |
| Recommended Warm-up Time | 20 minutes |
| Operating Temperature | 0 to 50 °C |
| Calibration Period | Annually or as needed |
| Software Driver | NI-DAQ version 6.5.1 or higher |
| Required Software | Application Development Environment (e.g., LabVIEW, LabWindows/CVI, Visual Basic) |
| Connectors | 50-pin male ribbon cable (back), 96-pin male DIN C (front) |
| Obsolete Status | Announced |
| Calibration Options | NIST accredited (via 3rd party), Basic in-house |
Question 1: What is the cut-off frequency of SCXI-1104C?
Answer 1: 10 kHz
Question 2: Is the SCXI-1346 adapter needed for multi-chassis setups?
Answer 2: Yes, it’s required.
Question 3: What software version is needed for SCXI-1104C?
Answer 3: NI-DAQ version 6.5.1 or higher
Question 4: Does SCXI-1104C have overvoltage protection?
Answer 4: No, it lacks overvoltage protection.
Question 5: What is the operational temperature range of SCXI-1104C?
Answer 5: 0 to 50 °C
