Description
The PCI-6025E is a PC-based Multifunction DAQ device, which falls under the E Series category, manufactured by National Instruments. This device comes with a part number 777744-01 and is designed to offer a high sample rate of 200 kS/s with a resolution of 12 bits. It provides flexibility in measurement with 16 single-ended or 8 differential analog input channels and includes 2 analog output channels.
For tasks requiring precise timing and counting, the PCI-6025E is equipped with 2 built-in 24-bit counters. It supports a maximum working voltage of ± 11 volts from the ground, ensuring a broad range of signal compatibility. The system-dependent update rate can reach up to 10 kHz, and it features a multiplying double-buffered DAC type, enhancing its efficiency and output quality.
Digital trigger capabilities are versatile, accepting either rising or falling edges, and the device can detect pulse widths as short as 10 ns. To ensure optimal performance, a 15-minute warm-up time is recommended, and to maintain accuracy, calibration is advised on a yearly basis.
This device is lightweight, weighing only 4.1 oz., and has compact dimensions of 6.9 x 4.2 in, making it easy to integrate into various setups. It interfaces through a 100-pin I/O connector and is compatible with a wide range of software including NI-DAQ, LabVIEW, Measurement Studio, and VirtualBench. Lastly, it has been announced as obsolete, which is critical information for users regarding support and availability.
| Specification | Detail |
|---|---|
| Part Number | 777744-01 |
| Model | PCI-6025E |
| Category | PC-based Multifunction DAQ |
| Series | E Series |
| Manufacturer | National Instruments |
| Sample Rate | 200 kS/s |
| Resolution | 12 bits |
| Analog Input Channels | 16 single-ended or 8 differential |
| Analog Output Channels | 2 |
| Built-in Counters | 2, 24-bit |
| Maximum Working Voltage | ± 11 volts (from ground) |
| Update Rate | 10 kHz (system dependent) |
| DAC Type | Multiplying double buffered |
| Digital Trigger Capabilities | Rising or falling edge |
| Pulse Width | 10 ns min |
| Recommended Warm-up Time | 15 minutes |
| Calibration Frequency | Yearly |
| Weight | 4.1 oz. |
| Dimensions | 6.9 x 4.2 in |
| I/O Connector | 100-pin |
| Software Compatibility | NI-DAQ, LabVIEW, Measurement Studio, VirtualBench |
| Obsolete Status | Announced |
Question 1: What is the sample rate of the PCI-6025E?
Answer 1: 200 kS/s
Question 2: How many input channels does the PCI-6025E have?
Answer 2: 16 single-ended or 8 differential
Question 3: What is the resolution of the PCI-6025E?
Answer 3: 12 bits
Question 4: What is the part number for the PCI-6025E?
Answer 4: 777744-01
Question 5: Is the PCI-6025E considered obsolete?
Answer 5: Yes
