Description
The PXI-5600 is a high-performance RF Downconverter designed to meet the demands of sophisticated RF signal processing tasks. With a Part Number of 778283-01, this device offers a suite of features tailored for accuracy, reliability, and performance. The PXI-5600 operates across a wide frequency range from 9 kHz to 2.7 GHz, ensuring versatility in various applications.
It boasts a Real-Time Bandwidth of 20 MHz, allowing for the capture and analysis of broad signal spectra. The Noise Density of <-140 dBm/Hz and Phase Noise of <-94 dBc/Hz at 10 kHz offset emphasize the device’s capability to deliver clean, accurate measurements even in the presence of low-level signals.
The Timebase Stability is rated at ±20 ppb, with a Frequency Accuracy of ±50 ppb, ensuring precise signal analysis over time. Its Intermodulation Spurious-Free Dynamic Range of >80 dB and Amplitude Error Compensation of <0.2 dB over 20°C change further enhance its performance reliability across a range of environmental conditions.
To facilitate seamless integration and operation, the PXI-5600 requires Software Requirement such as NI-RFSA 2.1, and NIPXI-5600 Support driver. It also features 6 connectors (FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, INPUT) for flexible connectivity options. The Warm-Up Time is approximately 20 minutes, after which it operates at peak accuracy, with a recommended Calibration Period of Annually or every two years to maintain its precision.
| Specification | Detail |
|---|---|
| Part Number | 778283-01 |
| Model | PXI-5600 |
| Category | RF Downconverters |
| Real-Time Bandwidth | 20 MHz |
| Operating Range | 9 kHz to 2.7 GHz |
| Noise Density | <-140 dBm/Hz |
| Phase Noise | <-94 dBc/Hz at 10 kHz offset |
| Timebase Stability | ±20 ppb |
| Frequency Accuracy | ±50 ppb |
| Intermodulation Spurious-Free Dynamic Range | >80 dB |
| Amplitude Error Compensation | <0.2 dB over 20°C change |
| Software Requirement | NI-RFSA 2.1, NIPXI-5600 Support driver |
| Connectors | 6 (FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, INPUT) |
| Warm-Up Time | 20 minutes |
| Calibration Period | Annually or every two years |
