Description
The Part Number 778283-01 pertains to a high-performance RF Downconverter, specifically the PXI-5600 model. This device is designed to operate within a bandwidth of 20 MHz real-time, ensuring efficient signal processing across a diverse range of applications. It boasts a substantial working range from 9 kHz to 2.7 GHz, accommodating a wide spectrum of RF signals. The noise density is exceptionally low, at -140 dBm/Hz, highlighting the converter’s ability to maintain signal integrity in various operational environments.
Additionally, the PXI-5600 features an Intermodulation Spurious-Free Dynamic Range of over 80 dB and a Phase Noise of less than -94 dBc/Hz at a 10 kHz offset, demonstrating its superior performance in minimizing signal distortion and interference. The device’s Timebase Stability is maintained within ±20 ppb, with an Accuracy of ±50 ppb, ensuring precise signal timing and frequency measurement.
Support for this RF Downconverter extends across multiple software platforms, including NI-RFSA 2.1, the NIPXI-5600 Support driver, and programming environments such as LabVIEW, LabWindows/CVI, and Microsoft C/C++. This versatility allows for seamless integration into various development and testing setups. The PXI-5600 is equipped with 6 connectors: FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, and INPUT, providing ample connectivity options for complex RF systems.
The Warm-up Time for the device is approximately 20 minutes, ensuring that it reaches operational stability quickly. To maintain its high level of accuracy and performance, a Calibration Period is recommended either annually or every two years, depending on usage intensity. Lastly, the Dimensions of the PXI-5600 are tailored to fit standard PXI slots, making it a compact and efficient solution for RF downconversion needs.
| Specification | Detail |
|---|---|
| Part Number | 778283-01 |
| Category | RF Downconverters |
| Model | PXI-5600 |
| Bandwidth | 20 MHz real-time |
| Working Range | 9 kHz to 2.7 GHz |
| Noise Density | < -140 dBm/Hz |
| Intermodulation Spurious-Free Dynamic Range | > 80 dB |
| Phase Noise | < -94 dBc/Hz at a 10 kHz offset |
| Timebase Stability | ±20 ppb |
| Timebase Accuracy | ±50 ppb |
| Software Support | NI-RFSA 2.1, NIPXI-5600 Support driver, LabVIEW, LabWindows/CVI, Microsoft C/C++ |
| Connectors | 6 connectors: FREQ REF IN, 10 MHz OUT, PXI 10 MHz I/O, OUTPUT, and INPUT |
| Warm-up Time | 20 minutes |
| Calibration Period | Annually or every two years |
| Dimensions |
