E3632A

Description

Keysight E3632A DC Power Supply

The Keysight E3632A DC Power Supply has two outputs. Output 1 has a Voltage between 0 to 15 V and a Current of 7 A and Output 2 has a Voltage ranging from 0 to 30 V and a Current of 4 A. The programming accuracy offers a Voltage of 0.05% + 10 mV and a Current of 0.2% +10 mA. This model also includes a Ripple and Noise with a Normal-mode voltage of <350 µVrms/2 mVpp, a Normal-mode current of <2 mA rms, and a Common-mode current of <1.5 µA rm.

The Keysight E3632A is a high execution, 120 watt, dual range DC power supply with GPIB and RS-232 interfaces. The blending of bench-top and framework characteristics in this power supply gives versatile results for design and test prerequisites. This power supply can be operated from a nominal 100 V, 115 V, or 230 v single phase AC power source at 47 to 63 Gz. An indication on the back board shows the nominal information voltage situated for the instrument at the factory.

In this Keysight model, the overvoltage security guards the load against output voltages that reach a specified value higher than the programmed protection level. It is accomplished by shorting the output by means of an inside SCR when the trip level is set to equivalent or higher than 3 volts. The other option is to program the output to 1 volt when the trip level is situated under 3 volts.

If you need more information, the manual for this model can be found on the ApexWaves.com website.

Technical Specifications