E8254A

Description

Agilent E8254A Signal Generator

With the Agilent E8254A Signal Generator, the user can perform the list sweep that enables them to make a frequency list, amplitude, the pause time esteems, and range of the RF output in view of the entries in the list mode Value table. Unlike a stepped sweep that contains linear up/frequency and descending amplitude esteems divided at parallel interims all through the range, sweep list frequencies and amplitudes can be transferred into unequal interims and non-straight ascending/decree or random order. In this model, for accommodation, the table of estimations of the list mode can be arranged based on the estimations of a configured step sweep. Frequency, amplitude, and time of permanence related values are entered in succession in the list mode esteems table.

The Agilent E8254A’s internal trigger produces an inside, triggered, pulse modulation. An RF pulse (with client characterized width and delay parameters) will happen at the RF OUTPUT connector when a legitimate trigger signal happens at the TRIGGER IN connector. In this model, the sine waves are with separately flexible frequencies and a percent-of-peak-amplitude setting for the second tone (accessible from function generator 1). A swept sine wave with customizable start and stop frequencies, clear time, and scope trigger settings. Utilizing inner screen 1 or 2 as the LF output source, the LF output gives an imitation of the signal from either inside source (1 or 2) that is being utilized to regulate the RF output. The adjustment parameters for this signal are arranged through the AM, FM, or ΦM menus.

Technical Specifications