MT9083A2

Description

Anritsu MT9083A2 Master Fiber

The Anritsu Master Fiber MT9083A2 Connection Check is set to "On" in the Settings Preferences screen, the connection confirmation is done consequently toward the start of every failure proof. The connection check screen consists of a straightforward pointer that gives a graphic representation of the quality of the connection with the guidelines detailing how to continue when the confirmation is "GOOD" and how to redress a “Bad Connection.” At the point when the connection check level is low, the bar in the connection gauge is red and just expands a short distance from the "LOW" end of the gauge. On the off chance that the connection state isn't improved, regardless of the possibility that the fiber is cleaned, the fiber should be supplanted.   

This model offers a Real Time Test mode that gives a quick real time perspective of the initial trace data. In this mode, trace information isn't constantly averaged, it is ceased and restarted after each screen update. Real Time mode empowers advancement of fiber connections at or close to the OTDR connector, as the trace display demonstrates the effect of changing the connections. To toggle through the source wavelengths, the red legend on the softkey changes with each key press.

The Range, Resolution Pulse Width, and Average Time settings decide the trace information distance range and resolution value (Data Point Spacing) and in addition the pulse width utilized for the test cycle. This model has a Wavelength of 1310/1550 nm ±25 nm, a Dynamic Range between 39 to37.5 dB and a Deadzone between ≤1 m ≤80 cm.

If you are interested in this model, you can read its manual on the ApexWaves.com website.

Technical Specifications