Description
The National Instruments SCC-AO10 Isolated Analog Output Module, with a part number of 777459-50, is designed to deliver an output voltage range of ± 10 volts, which can be extended to ± 20 volts by connecting two modules. Compatible with E/M Series DAQ devices, this module ensures isolation up to 60 VDC common mode and features a gain nonlinearity of only 0.5% over the full-scale output range.
Its output noise is kept minimal with a typical value of 2.5 mV and a maximum of 4 mV, while it can drive a current of ± 30 mA. For safety, it includes short circuit protection capable of handling up to 37 mA indefinitely. To achieve accurate measurements, a calibration warm-up time of 30 minutes is recommended before use.
| Specification | Detail |
|---|---|
| Part Number | 777459-50 |
| Product Type | Isolated Analog Output Module |
| Manufacturer | National Instruments |
| Output Voltage Range | ± 10 volts (extendable up to ± 20 volts with two modules connected) |
| Compatible Devices | E/M Series DAQ device |
| Isolation | Up to 60 VDC common mode |
| Gain Nonlinearity (Full-Scale Output Range) | 0.5 % |
| Output Noise (RMS) | Typical: 2.5 mV, Maximum: 4 mV |
| Current Drive | ± 30 mA |
| Short Circuit Protection | Yes, up to 37 mA for an unlimited duration |
| Calibration Warm-Up Time | 30 minutes |
Question 1: What is the compatible device for the National Instruments SCC-AO10 Isolated Analog Output Module, and what is its recommended calibration warm-up time before use?
Answer 1: The typical output noise value for the National Instruments SCC-AO10 Isolated Analog Output Module is 2.5 mV, and it can drive a current of ±30 mA.
Question 2: What is the recommended calibration warm-up time for the National Instruments SCC-AO10 Isolated Analog Output Module before commencing accurate measurements?
Answer 2: The National Instruments SCC-AO10 Isolated Analog Output Module can withstand a maximum common mode isolation voltage of 60 VDC, and its typical output noise value is 2.5 mV.
Question 3: What is the maximum common mode isolation voltage that the National Instruments SCC-AO10 Isolated Analog Output Module can withstand, and what is its typical output noise value?
Answer 3: The National Instruments SCC-AO10 Isolated Analog Output Module is compatible with E/M Series DAQ devices, and its recommended calibration warm-up time before use is 30 minutes.
Question 4: What is the typical output noise value for the National Instruments SCC-AO10 Isolated Analog Output Module, and what current can it drive?
Answer 4: The recommended calibration warm-up time for the National Instruments SCC-AO10 Isolated Analog Output Module before commencing accurate measurements is 30 minutes.
Question 5: What is the recommended calibration warm-up time for the National Instruments SCC-AO10 Isolated Analog Output Module to ensure accurate measurements?
Answer 5: The recommended calibration warm-up time for the National Instruments SCC-AO10 Isolated Analog Output Module to ensure accurate measurements is 30 minutes.
