Description
The SCC-LP02 Lowpass Filter Module, part number 777459-08, is designed for use with National Instruments systems, specifically compatible with the SC-2345, and is capable of handling input signals within a ±10 V range. The module is adept at reducing wide-band noise, featuring a specification of 100 microvolts RMS for frequencies ranging from DC to 1 MHz, RTI.
Its high impedance bias resistor makes it suitable for floating sources, and with a 50 Hz cutoff frequency, the SCC-LP02 effectively performs antialiasing filtering to remove undesirable high-frequency signals from E Series DAQ devices.
The module has versatile connectivity options with 1 x 20-pin right-angle male connector and 1 x 4-pin screw terminal I/O, and offers the ability to cascade with other SCC modules using pins 17 to 20.
Weighing in at just 1.3 oz and with compact dimensions of 3.50 x 1.15 x 0.73 inches, the SCC-LP02 is both lightweight and space-efficient, while also being built to operate within a temperature range that ensures reliable performance under varying environmental conditions.
| Specification | Detail |
|---|---|
| Part Number | SCC-LP02 |
| National Instruments Part Number | 777459-08 |
| Type | Lowpass Filter Module |
| Input Signal Range | ± 10 V |
| Wide-Band Noise (DC to 1 MHz, RTI) | 100 microvolts RMS |
| Compatibility | Plugs into any analog input socket on the SC-2345 |
| Impedance Bias Resistor | Applicable for floating sources |
| Cutoff Frequency | 50 Hz |
| Typical Input Bias Current | ± 2 nA |
| Antialiasing Filter Application | Removes high-frequency signals for E Series DAQ devices |
| Connectors | 1 x 20-pin right-angle male, 1 x 4-pin screw terminal I/O |
| Cascading | Yes, pins 17 to 20 are used for cascading |
| Weight | 1.3 oz |
| Dimensions | 3.50 x 1.15 x 0.73 in |
Question 1: What range of input signals can the SCC-LP02 Lowpass Filter Module handle, and what is its cutoff frequency for antialiasing filtering?
Answer 1: The SCC-LP02 Lowpass Filter Module weighs 1.3 ounces and has dimensions of 3.50 x 1.15 x 0.73 inches; however, the temperature range within which it is built to operate reliably is not specified in the provided description.
Question 2: What is the weight and the specific dimensions of the SCC-LP02 Lowpass Filter Module, and within what temperature range is it built to operate reliably?
Answer 2: The SCC-LP02 Lowpass Filter Module can handle input signals within a ±10 V range, and it has a cutoff frequency of 50 Hz for antialiasing filtering.
Question 3: What is the frequency specification for noise reduction of the SCC-LP02 Lowpass Filter Module, and what are its connectivity options?
Answer 3: The SCC-LP02 Lowpass Filter Module is designed to reduce noise with a specification of 100 microvolts RMS for frequencies from DC to 1 MHz, RTI, and offers connectivity options including a 1 x 20-pin right-angle male connector and a 1 x 4-pin screw terminal I/O.
Question 4: Considering the specifications provided, is the SCC-LP02 Lowpass Filter Module suitable for applications that require filtering out high-frequency signals above 50 Hz from E Series DAQ devices?
Answer 4: Yes, the SCC-LP02 Lowpass Filter Module is suitable for applications that require filtering out high-frequency signals above 50 Hz from E Series DAQ devices, as it has a 50 Hz cutoff frequency specifically designed for antialiasing filtering.
Question 5: What are the key features and specifications of the SCC-LP02 Lowpass Filter Module, part number 777459-08, for integration with National Instruments systems?
Answer 5: The SCC-LP02 Lowpass Filter Module, part number 777459-08, boasts key features such as compatibility with the SC-2345 National Instruments system, a ±10 V input signal range, a high impedance bias resistor ideal for floating sources, and a 50 Hz cutoff frequency for effective antialiasing filtering. It also has a noise reduction capability of 100 microvolts RMS for DC to 1 MHz frequencies, along with versatile connectivity that includes a 1 x 20
